Rinnai RC80I User Manual
Manuel – Rinnai Condensing Water Heaters
49
Installations
à
haute
altitude
Pour les installations de U.S., reportez-vous aux instructions d'anglaises.
The conversion shall be carried out
by a manufacturer’s authorized rep-
resentative, in accordance with the
requirements of the manufacturer,
provincial or territorial authorities
having jurisdiction and in accordance
with the requirements of the CAN/
CGA-B149.1 or CAN/CGA-B149.2
Installation Codes / La conversion
sera exécuté par un représentant du
fabricant autorisé, conformément aux
conditions du fabricant, les autorités
provinciaux ou territoriaux ayant la
juridiction et conformément aux con-
ditions du CAN/CGA-B149.1 ou
CAN/CGA-B149.2 Codes d'Installa-
tion
by a manufacturer’s authorized rep-
resentative, in accordance with the
requirements of the manufacturer,
provincial or territorial authorities
having jurisdiction and in accordance
with the requirements of the CAN/
CGA-B149.1 or CAN/CGA-B149.2
Installation Codes / La conversion
sera exécuté par un représentant du
fabricant autorisé, conformément aux
conditions du fabricant, les autorités
provinciaux ou territoriaux ayant la
juridiction et conformément aux con-
ditions du CAN/CGA-B149.1 ou
CAN/CGA-B149.2 Codes d'Installa-
tion
.
switch
micro-
commutateur dip
micro-
commutateur dip
0-2000 ft
(0-610 m)
2001-4500 ft
(610-1372 m)
No 2
OFF
OFF
No 3
OFF
ON
Switch No.
F
O
F
8
5
7
6
4
3
ON
1
2
Switch No.
F
O
F
8
5
7
6
4
3
ON
1
2
Procédure Reglage de Chaffeau á' Haute Altitude 610 - 1372 m (2001 - 4500 ft)
pour Canada Seulement
WARNING
DO NOT adjust the other
switches unless specifically
instructed to do so.
switches unless specifically
instructed to do so.
AVERTISSEMENT
NE modifiez PAS la disposition des
autres micro-commutateurs sauf sur
instructions spécifiques.
autres micro-commutateurs sauf sur
instructions spécifiques.
Tous reglages/ajustements doivent être exécutés par un Technicien d'entretien qualifié.
1. Coupez l`alimentation de gaz et électrique.
2. Enlever la couverture de devant du chauffe-eau.
3. Régler les micro-commutateurs 2 et 3 aux valeurs montrées dans la table au dessous pour votre altitude. Le
reglage de défaut pour l'appareil est 0-2000 ft (0-610 m) avec les commutateurs No 2 et No 3 sur la position
OFF.
OFF.
4. Ouvrez l`alimentatation de gaz et électrique.
5. Ouvrir un accessoire ou accessoires pour couler de l'eau par le chauffe-eau au débit maximum procurable (au
moins trois gallons par minute).