PVI Industries PV500-43 User Manual
PV500-43
PVI Industries, LLC P.O. Box 7124 Ft. Worth, TX 76111 1‐800‐433‐5654
Page | 1 7/10
Setup Manual
BACnet Protocol Gateway for TempTrac
®
and
XR10CX Water Heater Control
When a BAS interface with Temptrac or the XR10CX requires a protocol other than the standard
Modbus RTU for Temptrac and XR10CX, PVI Industries offers a premapped gateway from FieldServer
Technologies. The ProtoCessor ProtoNode RER currently supports BACnet IP or MSTP. Consult factory
for other protocols.
Technologies. The ProtoCessor ProtoNode RER currently supports BACnet IP or MSTP. Consult factory
for other protocols.
This manual is meant to be a general overview of the application of this gateway, for additional
information please visit: www.protocessor.com or contact FieldServer Technologies at 800‐317‐8319
Email: sales@protocessor.com for technical assistance. The ProtoCessor ProtoNode can be user
configured with the following specifics: IP address, serial address, baud rate and one of three register
profiles.
Email: sales@protocessor.com for technical assistance. The ProtoCessor ProtoNode can be user
configured with the following specifics: IP address, serial address, baud rate and one of three register
profiles.
RS‐485 port for Host
or Field serial
protocol support
or Field serial
protocol support
Ethernet port for
Diagnostics and Host or
Field Protocol support
Diagnostics and Host or
Field Protocol support
6 Pin RS‐485 +/‐ and FG
Power +/‐ and FG 5Vdc, 9‐30
Vac or Vdc
Power +/‐ and FG 5Vdc, 9‐30
Vac or Vdc
Dip switches
HARDWARE DISCRIPTION
Voltage
selection
jumper
selection
jumper