HP (Hewlett-Packard) CHPTOH-0711 User Manual

The remote control operates the TV. To use the remote 
control, point it at the remote control sensor on the 
front of the TV.

If you want to program a universal remote control to 
operate your HP TV, but HP is not listed in the 
supported brand codes, use a Philips TV code. The 
HP remote control transmits Philips-licensed remote 
control codes.

After you program your universal remote control with a 
Philips TV code, it can operate your HP TV functions for 
volume, mute, power, and input source.

Insert two non-rechargeable AA batteries into the 
remote control, ensuring that you place them with the 
proper polarity.

Press and open the cover on the rear of the remote 
control.

Insert the batteries into the remote control, making 
sure you match polarities.

Close the cover.

Do not mix together different types of batteries (for 
example, alkaline and carbon-zinc), or old batteries 
with fresh ones.

When installing the batteries, be sure to follow the 
correct polarity as indicated in the battery 
compartment. Reversed batteries may cause damage 
to the device.

When you are not using the remote control for a long 
period of time, remove the batteries to prevent damage 
or injury from possible battery leakage.

Do not try to recharge batteries that are not intended to 
be recharged; they can overheat and rupture. Follow 
the battery manufacturer’s directions for the batteries 
you are using.

Always remove batteries as soon as they become 
weak. Weak batteries can leak and severely damage 
the unit. The battery life depends on how much the 
remote control is used. Replace the batteries when 
remote control operation becomes erratic.

Do not take apart the batteries, heat them, or throw 
them into a fire.

n

5m 

PO

WE

R

MU

TE

CH

AD

J

AD

J

1

2

3

100

4

5

6

7

8

9

0

30º