BRK electronic SCO2LB Leaflet

Page of 2
Description:
SEPARATE SMOKE & CO
Combination alarm detects both
dangers and eliminates the need for
two separate alarms.
ELECTROCHEMICAL 
CO SENSOR 
Most accurate technology available for 
detecting carbon monoxide as compared to 
other sensing technologies. 
LATCHING ALARM 
INDICATOR 
Remembers which unit initiated an alarm.
END OF LIFE SIGNAL
Provides audible notice when alarm 
needs to be replaced.
TWO LOCKING 
FEATURES
Pins lock battery drawer and/or alarm to 
base. Perfect for apartment, dormitory or 
hotel applications.
Available in the following versions:
SCO2B  
Alkaline Battery
SCO2LB  
Long Life Lithium Battery
CAT. 
SCO2B/SCO2LB
9V Battery Powered
The BRK Brands, Inc. model No SCO2 is a battery powered single station 
combination smoke and carbon monoxide alarm specifically designed for 
residential and institutional applications including sleeping rooms of hospitals, 
hotels, motels, dormitories and other multi-family dwellings as defined in 
standard NFPA 101 Model SCO2B complies with UL217, UL2034, CSFM, NFPA 
72, NFPA 720, HUD, FHA and other agencies that model their codes after the 
above agencies. They meet building codes where battery powered smoke and 
carbon monoxide alarms are required either separately or in combination.
The BRK SCO2B features a dual ionization smoke sensing chamber and an 
electrochemical carbon monoxide sensor, 9V battery powered, an 85dB horn, an 
End of Life and a silence feature. The SCO2B features a 9V alkaline battery and 
the SCO2LB a 9V long life lithium battery. “Intelligent Sensing Technology” is 
designed to reduce nuisance alarms. “Latching Alarm Indicator” remembers 
which unit initiated an alarm. The unit that triggered the alarm will store in 
memory or “latch” the information and begin to flash the LED indicator 2 
seconds on, 2 seconds off. The “Perfect Mount” system features a gasketless 
base and a mounting bracket that keeps the alarm secure over a wide rotation 
range to allow for true alignment. A single button test/silence button eliminates 
confusion. Battery installation and removal can occur while the unit is mounted 
to the ceiling or wall via the side load battery compartment. Other Contractor 
Preferred features include a dust cover to keep alarm clean during construction. 
Two locking features are provided to prevent battery theft and/or theft of the unit. 
Designed for wall or ceiling mounting. Includes mounting anchors and screws.
SMOKE & CO
COMBO
A L A R M
7