GE GFB1000F User Manual

Silverware, bottle cap or other 

•

Remove the splash guard* and remove the object with

foreign object has fallen into the

long-handled tongs. Replace the splash guard*.

disposer.

Reset button has been tripped.

•

With the splash guard* removed, check to see if the 

turntable will move freely using a broom handle. If the 

turntable moves freely, replace the splash guard* and 

check the reset button to see if it has been tripped. The 

reset button is red and located opposite the discharge 

elbow, near the bottom of the disposer. Push the button 

in until it clicks and remains depressed. If the reset 

button has not been tripped, check for a shorted or 

broken wire connecting to the disposer. Check the 

electrical power switch, fuse box or circuit breaker. 

If wiring and electrical components are intact, the 

unit may have internal problems that require

service or replacement.

Turntable cannot rotate.

•

If the turntable does not turn freely, check for an 

object lodged between the turntable and the grind 

ring. Dislodge the object by moving the turntable 

with a broom handle. Then remove the object.
If no foreign object is present, there may be internal

problems.

If the leak is at the top, it may be
caused by:
1. Improper seating of sink flange 

(gasket choice, putty or tightening).

2. Support ring not tightened properly.
3. Defective cushion mount.
If the leak is at the discharge elbow, leak
may be caused by improper tightening 
of elbow flange screws.

11

Troubleshooting Tips 
Save time and money! Review the chart on this page first
and you may not need to call for service.

Reset
Button

Serial No.

Remove
Splash Guard

Turntable

Before resetting, disconnect the power supply–please see SAFETY NOTE above. The overload control prevents
the motor from operating should overloading occur. This feature protects your house wiring and your disposer.
When overloaded, the motor will stop automatically.

SAFETY NOTE: Before investigating, you must disconnect the power supply.

*Batch Feed does not include splash guard.