Philips HTS4562/12 User Manual
18
Check wireless network settings
1
Press (Home).
2
Select
[Setup], and then press OK.
3
Select
[Network] > [View Wireless
Settings], and then press OK.
»
The current Wi-Fi settings are displayed.
Name your home theater
To easily identify your home theater on a
network, name your home theater.
1
Turn on your TV, and switch to the correct
source for the home theater.
2
Press (Home).
3
Select
[Setup], and then press OK.
4
Select
[Network] > [Name your Product:],
and then press OK.
5
Press the Alphanumeric buttons to enter
the name.
6
Select
[Done], and then press OK to exit.
Wireless connection
Connect your home theater to your router
through a wireless connection.
What you need
•
A network router (with DHCP enabled).
•
A Wi-Fi dongle (Model: Philips WUB1110).
•
installed (see ‘Set up media server software’
on page 29).
•
For Net TV and software update, make sure
that the network router has access to the
Internet and is not restricted by firewalls or
other security systems.
Set up the wireless network
Connect your home theater to your router as
shown below, and then switch on the devices.
1
‘Wireless connection’ on page 18).
2
Turn on your TV, and switch to the correct
source for the home theater.
3
Press (Home).
4
Select
[Setup], and then press OK.
5
Select
[Network] > [Network Installation]
> [Wireless (Wi-Fi)], and then press OK.
6
Follow the instructions on the TV to
complete the setup.
»
The home theater connects to the
internet. If connection fails, select [Retry],
and then press OK.
7
Select
[Finish], and then press OK to exit.
EN