Philips BDH4222V/00 User Manual

Various geometric adjustments can be set using the Geometric 
Adjustment OSD menu. To access the Geometric Adjust sub-menu:

1

Press the MENU +/- keys on the remote or the front control panel.

2

The First menu displayed is the Picture menu. Make sure that the 
“Picture” OSD menu is displayed.

3

Use the MENU +/- keys to set the selection to “ON”. As soon as 
you press the button, the Geometric Adjust sub-menu will be 
displayed.

4

Press the ADJ +/- keys to move up and down to choose the option 
you wish to adjust. An explanation of each adjustment is listed 
below.

5

Use the ADJ +/- keys to change the setting.

Table below shows an explanation of the available geometric adjustments:

Selects the various screen width modes. See page 34 for more information.

Adjusts the Noice level. There are four settings to choose: OFF; lOW; MEDIUM;HIGH

Opens the Geometric Adjust sub-menu. 

Changes the vertical size of the picture. Increase to enlarge the picture size in the vertical direction. 
Decrease to reduce the picture size in the vertical direction.

Changes the vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture 
down

.

Changes the horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction. 
Decrease to reduce the picture size in the horizontal direction.

Changes the horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift the 
picture to the left

.

RETURN
Return to “PICTURE” OSD menu.