Philips 65PFS6659/12 User Manual

Page of 98
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using
the product and keep it away from children.
• If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.
• Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
13.3
Care of the 3D glasses
• Do not use cleaning chemicals containing alcohol, solvent,
surfactant, or wax, benzene, thinner, mosquito repellent or
lubricant. Using these chemicals can cause discoloration or
cracks.
• Do not expose the 3D glasses to direct sunlight, heat, fire or
water. This may result in a product malfunction or fire.
• Do not drop, bend or apply force to the lenses of the 3D
glasses.
• Use a clean soft cloth (microfiber or cotton flannel) to clean
the lenses to avoid scratching them. Never spray cleaner directly
onto the 3D glasses. This may damage the electronics (for
Active 3D glasses).
13.4
Watch 3D
To experience the best 3D effect while you watch 3D
programmes:
• Sit at a distance that is at least three times the width (w) of
the TV screen.
• Do not sit more than 6m away.
3D switching
 
 
The first time a 3D signal is detected, you can set your
preference on how to start 3D in the future.
• To switch to 3D automatically, select 
Automatic.
• To show a notification first, select 
Notification only.
• To never switch to 3D, select 
Never. 
You can still change this preference in 
 > Setup > TV settings
3D > Switch to 3D.
Start 3D
 
 
When the TV switches to 3D or when a notification is shown
that 3D is available, put on your 3D glasses.
If the TV cannot detect the 3D signal (the 3D signal tag is
missing), the 3D programme is shown as a double image on
screen. To switch to 3D, adjust the 3D settings and select 
Side
by side or Top / bottom according to the double image
positions.
1 - Press 
.
2 - Select 
3D settings > 3D - Side by side or 3D - Top /
bottom, then press OK. 
Stop 3D
 
 
To stop watching 3D, press 
, select 3D settings and select 2D.
3D is switched to 2D when you switch to another channel or
connected device.
2D to 3D conversion
 
 
You can convert any 2D programme to watch it in 3D.
1 - Press 
.
2 - Select 
3D settings > 2D to 3D conversion.
Adjust the 3D depth
 
1 - Press 
 and select Setup, then press OK .
2 - Select
 TV settings > 3D > 3D effect.
3 - Select 
Off, or On.
4 - Press 
, repeatedly if necessary, to close the menu.
Switch off 2D to 3D conversion
 
1 - Press 
.
2 - Select 
3D settings > 2D, then press OK. 
13.5
Optimal 3D viewing
For an optimal 3D viewing experience, we recommend that you:
• sit at least 3 times the height of the TV screen away from the
TV, but no further than 6 meters away.
• avoid fluorescent lighting (such as TL lighting or certain energy
saving light bulbs which operate on a low frequency) and direct
sunlight as they may interfere with the 3D experience. 
13.6
Health warning
• Watching 3D is not recommended for children under the age
of six.
• If you or your family have a history of epilepsy or
photosensitive seizures, consult a medical professional before
exposing yourself to flashing light sources, rapid image sequences
or 3D viewing.
47