Philips 65PFS6659/12 User Manual

4 - Configure bulb

Network

In this first step, you will prepare the TV to find the

Philips Hue

Bridge.

The TV and the Philips Hue Bridge must use the same network.
Connect the Philips Hue Bridge to the router — the router of
the network the TV is using.
Switch on the hue bulbs.

To start the configuration…

1 - Press

 (Ambilight) and select on any Ambilight Style.

2 - Press

 and select Setup and press OK.

3 - Select

TV settings > Ambilight > Ambilight+hue and press

OK.
4 - Select

Ambilight+hue one step further, select On and press

OK.
5 - Select

Configure Ambilight+hue and press OK.

If the TV is connected to your home network, it will start
looking for the Philips Hue Bridge immediately.
If the TV is not yet connected to your network, the TV will start
the network setup first. You must connect the TV to your home
network.

With the TV connected to your network, go to page

Hue

Bridge.

For more info on connecting the TV to your home network,
press



Keywords and look up Network, wireless.

Hue Bridge

In the following step, you will link up the TV with the

Philips

Hue Bridge.
The TV can only be linked up to one Hue Bridge.

To link the Hue Bridge…

1 - With the TV connected to the network, it will show the
available Hue Bridges. If the TV did not find your Hue Bridge yet,
you can select

Scan again and press OK.

If the TV found the only Hue Bridge you have, select

Next and

press

OK.

If you have more than one Hue Bridge available, press

 (up) or

 (down) to select the Hue Bridge you want to use and then
select

Next and press OK.

2 - After you pressed

OK, go to the Philips Hue Bridge and

press the link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30 seconds. The TV
will confirm if a Hue Bridge is linked to the TV.
3 - On this confirmation, select

OK and press OK.

With the Philips hue bridge linked to the TV, go to page

Hue

bulbs.

Hue bulbs

In the following step, you will select the

Philips Hue bulbs that

have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Ambilight+hue.

To select the bulbs for Ambilight+hue…

1 - In the

Configure Ambilight+hue menu, select Hue bulbs and

press

OK.

2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press

OK.

3 - When you’re done, select the

OK button and press OK.

With the bulbs marked for Ambilight+hue, go to page
Configure bulb.

Configure bulb

In the following step, you will configure each

Philips Hue bulb.

To configure each Hue bulb…

1 - Select the bulb name in the

Configure Ambilight+hue menu

and press

OK. The bulb you selected is blinking.

2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the

Angle will send the correct Ambilight

colour to the bulb. Press

 (up) or  (down) to adjust.

3 - Press

 (right) to set the distance.

4 - Secondly, indicate the

Distance between the bulb and the

TV. The further away from the TV, the weaker the Ambilight
colour. Press

 (up) or  (down) to adjust.

5 - Press

 (right) to set the brightness.

6 - Finally, set the

Brightness of the bulb. Press

 (up) or 

(down) to adjust.
7 - To stop configuring this bulb, select

OK and press OK.

8 - In the

Configure Ambilight+hue menu, you can select every

bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select

Finish

and press

OK.

Ambilight+hue is ready for use.

You can always change the Ambilight+hue configuration later.
To change the configuration, press

 and select Setup > TV

settings > Ambilight > Ambilight+hue > Configure
Ambilight+hue.

Immersion

With

Immersion, you can adjust the level of the Ambilight effect

for the Ambilight+hue bulbs.

To adjust the Ambilight+hue Immersion…

1 - Press

 and select Setup and press OK.

2 - Select

TV settings > Ambilight > Ambilight+hue >

Immersion and press OK.
3 - Press

 (up) or  (down) to adjust.