Philips Electric razor 7315XL 7315XL/17 User Manual

16

C

 

  Open Razor Head assembly again and 

leave open to air dry.

 NOTE: Do not wipe or dry the shaving heads

with a towel or tissue. This could damage the

shaving heads.

C

 

  If the shaving unit becomes detached from 

the razor, you can easily reattach it.

 

  You may also clean the hair chamber 

without water by using the supplied 

brush.

Do not mix up the cutters and combs as the  

shaving performance may be adversely affected for 

several weeks before optimal shaving performance 

is restored.

 

Turn razor OFF, remove the charging plug 

from the outlet and cord from the razor.

C

 

  Press the razor head release button to 

open the razor head assembly.

C

 

  Turn the black 3-pronged locking bracket 

counterclockwise (1) and remove the 

retaining frame (2).

17

C

 

  Remove and clean one set of cutters and 

combs at a time.

C

 

  Separate the cutter from the comb and 

rinse clean under hot water.

Do not clean more than one cutter and comb 

at a time, since they are all matching sets. If you 

accidentally interchange the cutters and combs, it 

could take several weeks before optimal shaving 

performance is restored.

C

 

  Replace the set back into the Razor Head 

Assembly so that the “wings” on the comb 

fit within the brackets located towards the 

center of the Assembly.

The set will only fit into the Razor Head Assembly 

if the ‘wings’ are between the brackets. Make sure 

that the two pointy edges of the head fit exactly 

into the recesses. 

 

  Repeat the process for the other two sets 

of cutters and combs. 

 

  Replace the frame.

C

 

  Press down (1) and turn the black  

3-pronged locking bracket clockwise (2) 

until it locks into place.

 

16