M-AUDIO Computer Drive User Manual

www.gateway.com

This error is usually seen as the computer starts up.

■

Check the BIOS to make sure that the drives are identified correctly.

■

Open the computer and reseat the diskette drive cable.

■

Try another diskette drive cable.

■

Make sure that the drives are correctly identified in the BIOS. For more 
information, see “Configuring the BIOS” on page 28.

■

Make sure that the drive cables are connected securely. For more 
information, see “Installing a drive” on page 23.

■

If the supervisor password is enabled in the BIOS, remove the password.

This error can be caused by incorrect BIOS settings including the diskette drive 
not being identified at all. Check the BIOS to make sure that the drives are 
identified correctly. For more information, see “Configuring the BIOS” on 
page 28.

This error may occur if you are trying to format a diskette that is defective or 
if you are trying to use a media type that is incompatible with your diskette 
drive.

This error occurs primarily in Windows when you attempt to access the diskette 
drive without a diskette inserted.

This error occurs if you have a diskette other than a system (boot) diskette in 
the diskette drive as you start up the computer. If you have a bootable system 
diskette in the drive and you still receive this error, the diskette drive cable may 
not be connected securely. See “To reseat the cable:” on page 39.

Always make sure that the diskettes you are attempting to use are high density, 
good quality diskettes.