Indesit IDPE845A1ECOUK User Guide

This household tumble drier is a

Condenser

The weighted Annual Energy Consumption (AEc)*  kWh 1)

 305.4

This household tumble drier is a

Automatic

Energy consumption full load; Edry - kWh 2)

 2.64

Energy consumption partial load; Edry½ - kWh 2)

 1.34

Power consumption: off-mode  (Po) - Watts

 0.14

Power consumption: left-on mode (Pl) - Watts

 2.39

Prog. Time - weighted (Tt) full & partial load - minutes 3)

 173

Full load (Tdry) - minutes

 235

Partial load (Tdry½) - minutes

 127

weighted (Ct) full & partial load 3)

 71

full load  (Cdry)

 72

partial load  (Cdry½)

 71

Airborne acoustical noise emissions - dB(A) re 1 pW

 69.0

Programme time in minute, for program “Synthetics” full load

 90

Partial load for program “Synthetics” N/A

Average condensation efficiency - %

1) The "standard cotton” at full and partial load are the standard programmes to 
which the information in the label and the fiche relates. The standard cotton 
program is suitable to dry at cupboard level (0%)  cotton laundry and is the most 
efficient programme in terms of energy consumption. Partial load is half the rated 
load.

2) based on 160 drying cycles of the standard cotton programme at full and partial 
load, and the consumption of  the low-power modes.  Actual energy consumption 
will depend on how the appliance is used.
3) Weighted average of 3 cycles at full load and 4 cycles at half load.
Regulation 932/2012.

Energy consumption in kWh, for program “Synthetics” full load

 0.92

Energy efficiency class on a scale from A+++ (low consumption) 
to D (high consumption) 

 A+

Duration of the 'left-on mode' for  power management system - 
minutes

 30

Condensation efficiency class on a scale from G (least efficient) to 
A (most efficient)

 C

Brand
 Indesit
Model

 IDPE 845 A1 ECO (UK)

Rated capacity of cotton laundry for the "standard cotton 
programme" at full load - kg

 8.0

• Place your dryer at a 

distance from gas ranges, 

stoves, heaters, or cooktops 

because flames can damage 

the appliance. The dryer 

should be installed in an 

ambient room temperature 

of between 20 to 23°C 

for optimum performance. 

But will function if the room is between 14 and 

30°C. If you are going to install the appliance 

under a work counter, be sure to leave a 10 mm 

space between the top and any other objects 

on or above the machine and a 15 mm space 

between the sides and lateral furnishings or 

walls. This is to ensure proper air circulation.

The appliance must be installed with the rear 

surface placed against a wall. 

• When the dryer is in use, there has to be adequate ventilation. 
Make sure you put your dryer in an environment that is not damp 
and has proper air circulation throughout. Airflow around the dryer is 
essential to condense the water produced during the washing, the 
dryer will not operate efficiently in an enclosed space or cupboard.

 If using the dryer in a small or cold room some 

condensation will be experienced.

!

We do not recommend that the dryer is 

installed in a cupboard but the dryer must never 

be installed behind a lockable door, a sliding 

door or a door with a hinge on the opposite 

side to that of the dryer door.

1

2

   

2

1

Less than 1m

Fig. A 

Fig. B

If the machine is positioned close to a drain it is possible to drain the 
condensed water directly without using the waterbottle. In which 
case it is no longer necessary to empty the water bottle at the end 
of each cycle. If the Dryer is positioned above or close to a Washing 
Machine the same drainage can be used. Just remove unlink the 
tube indicated in figure A and connect it to the drainage. If the 
drainage is further away than the length of the tube it is possible to 
buy and connect a tube of the same diameter and the necessary 
length  in order to reach the drainage. To install the new tube just 

substitute the existing one as indicated in figure B inserting it in the 
same place.

! The drain tube has to be below 1 m from the bottom of the Dryer.
! Once the Dryer has been installed please assure that the drain 
tube is not bent or kinked.

Before plugging the appliance into the socket, 

check the following: 

•  Make sure your hands are dry.

•  The socket must have an earth connection.

•  The socket must be able to withstand the 

machine’s maximum power output as indi-

cated on the rating plate (see Description 

•  The power supply voltage must fall within 

the values indicated on the data plate (see 

•  The socket must be compatible with the 

dryer’s plug. Should this not be the case, 

replace the plug or the socket.

! DO NOT USE EXTENSION CORDS. 

(MAIUSCOLO)

! The dryer must not be installed outdoors, 

even if the space is sheltered. It can be very 

dangerous if exposed to rain or storms.

! Once installed, the dryer’s electrical wire and 

plug must be within reach.

! The power cord must not be bent or 

squashed.

! If the plug being replaced is a non-

rewirable type, then the cut-off plug must 

be disposed of safely. DO NOT leave it 

where it can be inserted into a socket 

and create a shock hazard.
! The power must be regularly che-

cked. If the supply cord is damaged, it 

must be replaced by the manufacturer, 

its service agent or similarly qualified 

persons in order to avoid a hazard.  

(see Assistance). New or longer elec-

tric cords are supplied by authorised 

dealers at a supplementary cost.

! The manufacturer denies any 

responsibility should any of these rules 

not be followed.

! If in doubt about any of the above 

consult a qualified electrician.

Once the tumble dryer is installed, clean the inside of the 
drum before operating it and remove any dirt accumulated 
during transportation.

The dryer must be installed level for correct 

operation.

When you have installed your dryer in its final 

location check that it is level first side-to-side, 

then front to back. If the dryer is not level, 

adjust the two legs up or down until your 

dryer is level.

  

Once you’ve installed your dryer and before you use it, clean 

the inside of the drum to remove any dust that could have 

accumulated during transportation.
Warning ! Before you use your dryer ensure that its has 

been in a upright position for at least 6 hours. 

10 mm

15 mm

15 mm

Maximum load sizes: maximum 8 kg