Adtran MX410 User Manual

MX410/MX412 System Manual

Menu Descriptions

61189500L1-1B

PRELIMINARY 5-39

3

FXS (MX412 only)

This option is used to provision the FXS port. Options are as 
follows:

• Choose TO Group (for DS1 1 through DS1 4)
• Choose TO DS0 Range: enter a range
• Mode: Select Loop Start, PLAR D4, PLAR D3, or FX Ringdown. 

Refer to 

on page 4-9 for descriptions of these options.

• Apply Cross-Connect

3

System ID

This option is used to assign a new system ID.

4

IP Address

This option is used to enter the IP Address for the MX410/MX412. 
The IP Address is written in the format XXX.XXX.XXX.XXX, where 
each 3-digit field has a value between 1 and 255.

N/A

Subnet Mask

This option is used to enter the subnet mask, written in the format 
XXX.XXX.XXX.XXX, where each 3-digit field has a value between 1 
and 255.

5

 Default Gateway

This option is used to enter the default gateway. The Gateway 
address is written in the format XXX.XXX.XXX.XXX, where each 3-
digit field has a value between 1 and 255. 

6

Date

This option is used to enter the date.

7

Time

This option is used to enter the time.

8

Cross-Connect 
Mapping

This is another path to the Cross-Connect Mapping Menu shown in 

on page 5-23 and contains the same options.

Table 5-20.  Quick Setup Menu Options (Continued)