Hotbrick VPN 800 / 2 User Manual

2 

 
 
 

This guide was constructed to aid you through all types of configurations used by most major 

ISPs, and set them up on your LB-2, LB-2 VPN, or VPN 800 
 
 

 

Bell South uses the PPPoE protocol which requires you to input a user name and password.  If 

you used any software to connect to the internet please uninstall it now as you will no longer need it.  
Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to 

http://192.168.1.1

 using your favorite web browser.  Set the connection type to PPPoE and input your 

user name and password into this PPPoE field, leave PPTP unchecked.  Press the Submit button at 
the bottom of the page and you are done.  Also, set the Echo Retry to 90 seconds under Advanced 
Port, Port Options menu. 

 

 

 

During the installation of your cable internet services, the installer should have paperwork with 

your registration information, copy down MAC address or Adapter Address from that a piece of 
paper.  If you do not have this information, you can find out your MAC address by going to 
Start>Run, type in CMD and press enter.  In the Command Prompt enter ipconfig/all and write down 
your MAC address.  Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by 
going to 

http://192.168.1.1

 using your favorite web browser.  Set the Connection type as Dynamic IP 

and scroll down to Optional.  In the MAC address field , type in that MAC address separated by 
hyphens.  (Example: 0F-0F-0F-0F-0F-0F).  Press the Submit button at the bottom of the page and 
you are done. 
 
 

 
 

During the installation of your cable internet services, the installer should have paperwork with 

your registration information. The next step is to copy down the Domain Name from that piece of 
paper.  You may also call Cox to find out your Domain name.  Once you have done that, login to the 
LB2/LB2 VPN/VPN 800 WAN Router by going to 

http://192.168.1.1

 using your favorite web browser.  

Set your connection type as Dynamic IP and scroll down to Optional.  In the Domain Name field enter 
your Domain Name.  Press the Submit button at the bottom of the page and you are done. 
 
 

 
 

Earthlink uses the PPPoE protocol which requires you to input a user name and a password.  

If you used any software to connect to the internet please uninstall it now as you will no longer need 
it.  Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to