Monessen Hearth CDVR33N/PV7 User Manual

38

1.  Stop! Read the safety information above.
.  This appliance is equipped with an ignition device which automatically lights the burner. Do not try 

to light the burner by hand.

3.  With five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell 

gas, Stop! Follow "B" in the safety information on page 38. If you do not smell gas, go to next step.

4.  Press the master switch to the "ON" (-) position. Within eight (8) seconds it will beep once. This 

indicates the system is ready.

5.  Press "ON " button. Sparker will spark and pilot flame will light. 
6.  Once pilot flame is established, the main burner flame will light automatically.
7.  If the pilot will not stay lit after several tries, turn the master switch to "OFF" and call your service 

technician or gas supplier.

1.  Turn master switch to "OFF".
.  Turn off all electrical power to the appliance if service is to be performed.

FP1913
Switch box 
8/08

ON

Master 
Switch

OFF

FP1914
Pilot w sparker 
8/08