B&B Electronics Four Port User Manual
Documentation Number 3PCISD4x-3903 Manual
Chapter 3
13
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Chapter 3: WINDOWS INSTALLATION
Windows 95 and Windows 98
Any prior installation using previous B&B Serial drivers must be
removed before installing the new drivers (refer to page 20).
removed before installing the new drivers (refer to page 20).
Windows 98 screens are shown for this section. Windows 95 is a bit
different, fewer steps and the screen names and text shown differs.
Windows 95 differences are noted (W95:…).
different, fewer steps and the screen names and text shown differs.
Windows 95 differences are noted (W95:…).
1.
Configure each port on the PCI card to the desired RS-
232/422/485 mode using the jumpers for Port 1, 2, 3 & 4.
232/422/485 mode using the jumpers for Port 1, 2, 3 & 4.
2.
Install the card in the slot, start the computer.
3.
Windows will detect the PCI card, start the Add New Hardware
Wizard, and begin driver installation. When installation is
complete, Windows will set the hardware addressing & interrupt
using the drivers and the Plug and Play function of the
Operating System.
Wizard, and begin driver installation. When installation is
complete, Windows will set the hardware addressing & interrupt
using the drivers and the Plug and Play function of the
Operating System.
4.
The driver installation proceeds in two parts: the first part
installs the driver for the PCI Serial card, the second part installs
the serial driver for each Com port on the card. After Port A
installation is finished, installation of Ports B, C, & D will proceed
without additional user input. (Port A=Port 1, Port D=Port 4)
installs the driver for the PCI Serial card, the second part installs
the serial driver for each Com port on the card. After Port A
installation is finished, installation of Ports B, C, & D will proceed
without additional user input. (Port A=Port 1, Port D=Port 4)
continued next page
14
Chapter 3
Documentation Number 3PCISD4x-3903 Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
5.
After new hardware is detected, this screen will appear. (W95:
This screen is named Update Device Driver Wizard.)
This screen is named Update Device Driver Wizard.)
6. Click Next to continue. (W95: Insert the Driver Disk in Drive,
then click Next - skip to step 9.)
then click Next - skip to step 9.)
7. Click Next.