Multi-Tech Systems MVP-2410 User Manual

52 

Functional Equivalence of Interfaces.  The MultiVOIP configuration 

program is required to do the initial configuration (that is, setting an IP 

address for the MultiVOIP unit) so that the VOIP unit can communicate 

with the MultiVoipManager program or with the web browser GUI.  

Management of the VOIP after that point can be done from any of these 

three programs since they all offer essentially the same functionality.  

Functionally, either the MultiVoipManager program or the web 

browser GUI can replace the MultiVOIP configuration program after 

the initial configuration is complete (with minor exceptions, as noted).   

WARNING: Do not attempt to interface the MultiVOIP unit with 

two control programs simultaneously (that is, by 

accessing the MultiVOIP configuration program via 

the Command Port and either the 

MultiVoipManager program or the web browser 

interface via the Ethernet Port).  The results of using 

two programs to control a single VOIP 

simultaneously would be unpredictable.