Minuteman UPS AT2300 User Manual
11
to identify a bad slow blow fuse visually. If the fuse is blown, replace it
with a fuse of the same type and ratings.
with a fuse of the same type and ratings.
Reset breaker if tripped.
Unit drops or reboots computer but continues to run in Inverter Mode. Unit is slightly
overloaded. Disconnect some of the load and try again.
Unit goes immediately to low battery warning. Batteries are bad or require a charge.
Unit goes off when commercial power is interrupted -- no Inverter Mode function.
Batteries are disconnected or bad or internal battery fuse is blown.
POLICY AND INSTRUCTIONS FOR RETURN OF PRODUCT TO PARA
SYSTEMS, INC.
SYSTEMS, INC.
If product must be returned to Para Systems, Inc. for any reason:
Call Para Systems at (972) 446-7363 and ask for Customer Service.
Describe the problem or reason for return and you will be given a Return Material
Authorization Number (RMA #). This number must be placed on the shipping carton,
preferably on the return shipping label. The RMA # on the carton will ensure prompt
handling when received at Para Systems, Inc.
preferably on the return shipping label. The RMA # on the carton will ensure prompt
handling when received at Para Systems, Inc.
Pack the unit for shipment in the original carton and foam as received. Other
packaging methods can result in damage to the unit.
Enclose the name and telephone number of the person who can authorize repair
charges inside the carton or packing list folder. Also include your current address for
product return.
product return.
Return the unit freight prepaid to Para Systems headquarters at the address shown
on the front of this brochure. COD shipments will not be accepted.
If repair of the product is Para Systems, Inc. responsibility, per the warranty
statement, there will be no charge for the repairs and the product will be returned to
you, freight prepaid, provided the unit(s) was returned in the original shipping carton
and foam. If other packing methods used result in unit damage during shipment, this
repair will be at your expense. Additionally, if your packaging is not deemed usable
for return of the product to you, you will incur a $10 charge for a new box and foam.
you, freight prepaid, provided the unit(s) was returned in the original shipping carton
and foam. If other packing methods used result in unit damage during shipment, this
repair will be at your expense. Additionally, if your packaging is not deemed usable
for return of the product to you, you will incur a $10 charge for a new box and foam.
If the repair of the product is not Para Systems, Inc. responsibility, Para Systems will
advise you of the estimated repair charges by telephone for your authorization.
Should you choose to not have the unit repaired, you will incur a repair estimate
charge of $15 only. All products will be returned COD for the amount of the repair or
repair estimate plus shipping and handling.
Should you choose to not have the unit repaired, you will incur a repair estimate
charge of $15 only. All products will be returned COD for the amount of the repair or
repair estimate plus shipping and handling.