Fujitsu Primergy RX300 S2 S26361-K937-V163 Leaflet

Data Sheet 

⏐ Issue: 3/29/2006⏐ PRIMERGY RX300 S2 

Page 2 / 2 

 

Dual Processor/Socket Rack Server  

D 1889 / D 2089 (only for Dual-Core) 

  Chip set 

Intel® E7520 

  Processors 

64-bit Intel® Xeon™ (1 - 2) 

  Frequencies (GHz) 

2.80,3.00,3.20,3.40,3.60, 3.80 / 
Dual-Core 2.80 

  Front-Side-Bus  

800 / 800 MHz 

  Second-Level-Cache  

2 Mbyte / 2x 2 MB, ECC 

1 Gbyte up to max. 16 Gbyte 

2-way interleaved, registered ECC DDR2-400 SDRAM; 4 banks 
with 2 slots each for PC2-3200 modules with 512, 1 and 2 Gbyte; 
Memory Scrubbing, Chipkill™, Hot-spare Memory option and 
Memory Mirroring option 

Flash-EPROM 
Local BIOS update with floppy disk; Remote BIOS-Update via 
LAN with Global Flash and service partition or through 
chipDISK/RTDS via modem 
Interfaces  
  Serial 

1x RS-232-C (9-pin) (usable for BMC 
 or OS or shared) 

  Serial 

1x RS-232-C (9-pin) 

  Parallel (option) 

Centronics, 25-pin, EPP/ECP comp. 

  Keyboard, Mouse 

2x PS/2  

  USB 2.0 

2x front, 2x back; (OHCI, 480 Mbit/s) 

  Graphics 

1x VGA (15-pin) 

  LAN 

2x RJ45 

  SCSI (option) 

external Ultra320 SCSI, 68-pin 

Front Panel 
On/off switch; NMI-, reset button; LEDs for system status 
(amber), identification (blue), hard disks access (green), power 
(amber/green); (back: system status, identification) 

Onboard controller ** 
  IDE (ATA100) 

for 1 x CD / DVD plus 1 x RemoteView 

  SCSI (LSI53C1030) 

2-channel Ultra320 SCSI with RAID 
level 1 (Integrated Mirroring Enhanced 
also for odd numbered HD´s) (for 
Windows and Linux) 

  MegaRaid PCI  
  Express™  
  RoMB (options) 

RAID level 0, 1, 10, 5, 50 extension for 
onboard SCSI/RAID controller with 256 
MB, or 128 MB / 256 MB RAID cache 
(both with ITBBU) and iButton enable 
key 

  LAN (BroadCom5721)   2x 10/100/1000 Mbit/s Ethernet 

(PCE-Boot via LAN from PXE server)  

  Graphics 

ATI Rage XL 8 MB  

  Server management 

Baseboard Management Controller 
(BMC), IPMI 1.5 compatible 

36, 73, 146, 300 Gbyte,U320 SCSI 

1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible 
capacity may vary. 

I/O Slots (Standard) 
  3 x PCI-X 64-bit / 100 MHz, low profile; 3.3 V 
  (with IOOP™ bus 1 x 133MHz if only slot 3 is used) 
  2 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V hot-plug 
I/O Slots (risercard option) 
  1 x PCI-X 64-bit / 100 MHz, long, full height;  
  2 x PCI-X 64-bit / 100 MHz, short, full height 
Drive bays  
  for hard disks  

6x 3.5/1-inch, slide-in chassis;  
over 1 or 2 SCSI channels (option)  

  for accessible drives 

1x 5.25/0.5-inch, for CD or DVD;  
1x 3.5/0.5-inch, for FD drive or 
LocalView display option 

  for optional  
  accessible drives 

1x 3.5/2-inch for hot-plug tape drive, 
requires 2 hard disk bays  

Standard / redundant (option):  1 + 1 units, 4 fans each 

All rights, including rights created by patent grant or registration of a utility model or design as well 
as rights of technical modifications are reserved. Delivery subject to availability. Designations may 
be trademarks, the use of which by third parties for their own purposes may violate the rights of the 
trademark owners. 
 
Copyright 

© Fujitsu Siemens Computers, 03/2006 

  Published by  

 
Fujitsu Siemens Computers 
http://www.fujitsu-siemens.com/

Company stamp 

 

 

 

Electrical values  
1x Hot-plug power supply unit as standard.  
Additional hot-plug unit for redundancy option  
  Output power 

600 W  /  1 + 1 x 600 W  each 

  Rated voltage range 

100 - 240 V  

  Rated frequency 

50-60 Hz  

  Max. rated current  

100 V - 240 V / 8 A – 3 A 

  Rated current in basic  
  configuration 

100 V - 240 V / 4.2 A - 1.4 A  

  Active power 

 681 W   

  Apparent power 

 689 VA   

  Heat emission 

2452 kJ/h (2324 btu/h)  

Temperature/Noise/Dimension/Weight 
  Ambient temperature 

10°C - 35°C (EN60721-3-3 class 3K2)

  Sound pressure L

pAm 

 <=  57 dB (A) (ISO9296)  

  Sound power L

WAd

 <= 7.1 B (ISO9296) 

  Overall measures  

85.9 * 482.6 * 785 (mm); (HxWxD) 

  Rack mount depth / U:  
  Rack cable depth: 

745 mm / 2 U,  
100 mm (900mm Rack 
recommended) 

  Rack integration kit 

inclusive telescopic rails as part of the 
standard delivery  

  Weight  

~ 25 kg (configuration dependent) 

  Global / Europe 

IEC 60950-1 / EN 60950-1 

  USA 

UL 60950 3rd. Ed. 

  Canada 

CAN/CSA-C22.2 No. 60950 3rd. Ed. 

  Europe 

EN 55 022 class A, EN 55024,  
EN 61000-3-2 / -3-3 

  Taiwan / Japan 

BSMI class A; VCCI class A /JEIDA 

  Australia / New Zealand  C-Tick class A 

  USA / Canada 

FCC class A 

  Europe (CE)  

89/336/EEC(EMV);73/23 EEC(LVD) 

  North America  

FCC class A  

  Global  /  Europe 

CB  /  CE 

  USA / Canada 

CSA

US

 / CSA

C

There is general compliance with the safety requirements of all 
European countries and North America. National approvals 
required in order to satisfy statutory regulations or for other 
reasons, can be applied for on request. 

  Microsoft: Windows 2003 Standard, Enterprise IA32 Edition;  
  Microsoft: Windows 2003 Standard, Enterprise x64 Edition;  
  Microsoft Windows 2003 Web Edition 
  Microsoft: Windows 2000 Advanced Server; Server 
  Novell: NetWare 6.5 
  VMware: ESX Server 2.5.2 
  SCO: UnixWare 7.1.4; Open Server 5.0.7 
  SUSE:  Enterprise Server 8 for X86 and 9 x86 / EM64T  
              Linux 9.1, 9.3 for X86 
  Red Hat: Enterprise Linux 2.1; 3 and 4 for X86 / EM64T 
** For supported controllers (onboard and PCI cards for SCSI, 
RAID, LAN, WAN, etc.), please refer to the corresponding system 
configurator. 
Server Management (see separate data sheets) 
  Standard:  

PRIMERGY ServerView Suite;  
PDA, ASR&R  

  Optional: 

RemoteView with IDE chipDISK and 
RemoteView Service Board (RSB S2)