Philips 37 User Manual

English

Troubleshooting

WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.

“

NO DISC” is displayed.

Some files on the USB device are not
displayed.

“

POWER NOT ENOUGH” is displayed.

Radio reception is poor.

Tape recording or playback cannot be
made.

The tape deck door cannot open.

The system does not react when buttons
are pressed.

Sound cannot be heard or is of poor
quality.

Problem

Solution

✔

Insert a disc.

✔

Wait until the moisture condensation at the lens
has cleared.

✔

Replace or clean the disc, see “Maintenance”.

✔

Use a finalised CD-RW or a correct MP3/WMA
-CD format disc.

✔

Check if the number of folders exceeds 99 or
the number of titles exceeds 999.

✔

Only the completely ripped MP3/WMA file can
be found and played by MCM760. Check if the
file has been completely ripped.

✔

Check if the USB device needs extra power
supply.

✔

If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.

✔

Increase the distance between the Micro HiFi
System and your TV or VCR.

✔ Use only NORMAL (IEC I) tape.

✔ Apply a piece of adhesive tape over the missing

tab space.

✔ Remove and reconnect the AC power plug and

switch on the system again.

✔

Remove and reconnect the AC power plug and
switch on the system again.

✔

Adjust the volume.

✔

Disconnect the headphones.

✔

Check that the speakers are connected correctly.

✔

Check if the stripped speaker wire is clamped.

001-036_MCM760_37_Eng

2/16/2006, 20:12