Audiovox avr2000 Instruction Manual
SETUP
(Continued)
Connecting the Radio Antenna
FM: Connect the FM antenna (included) to the FM ANTENNA terminals. Fully unwind the wire antenna. Then
extend the wire antenna and place it in the position that sounds best.
AM: Connect the loop antenna (included) to the AM LOOP ANTENNA jack. Rotate the antenna to get the best
receiving position.
AV1 (SAT/VCR)
Connect the audio and video output jacks of the AV equipment (VCR, Satellite receiver, etc.) to the audio and
video input jacks on the unit with an Audio/Video cable (included).
If the AV equipment has a bitstream/PCM coaxial audio out jack, Connect the equipment to the unit by using
a coaxial cable.
Connect the audio and video output jacks of the AV equipment (VCR, Satellite receiver, etc.) to the audio and
video input jacks on the unit with an Audio/Video cable (included).
If the AV equipment has a bitstream/PCM coaxial audio out jack, Connect the equipment to the unit by using
a coaxial cable.
AV2 (DVD)
Connect the audio and video output jacks of the DVD player to the audio and video input jacks on the unit with
an Audio/Video cable (included).
Connect the coaxial digital audio output jack of the DVD player to the DIGITAL AUDIO IN on the unit by using
a coaxial cable.
Connect the audio and video output jacks of the DVD player to the audio and video input jacks on the unit with
an Audio/Video cable (included).
Connect the coaxial digital audio output jack of the DVD player to the DIGITAL AUDIO IN on the unit by using
a coaxial cable.
Video & Audio Input/Output Setting
6
TV
Connect the audio and video input jacks of your TV to the audio and video output jacks on the unit with an
Audio/Video cable (included). Refer to that TV’s owner’s manual.
To record the playing signal, connect AUDIO OUT to the recordable equipment (Recordable cassette player,
Recordable MD player, etc.).
Connect the audio and video input jacks of your TV to the audio and video output jacks on the unit with an
Audio/Video cable (included). Refer to that TV’s owner’s manual.
To record the playing signal, connect AUDIO OUT to the recordable equipment (Recordable cassette player,
Recordable MD player, etc.).
Watching a DVD
1. Connect the unit to the TV and the DVD player.
2. Turn on the unit and press the FUNCTION button on the remote control to select AV2 auto-detected mode,
1. Connect the unit to the TV and the DVD player.
2. Turn on the unit and press the FUNCTION button on the remote control to select AV2 auto-detected mode,
or press AV2 button on the front panel directly. If no sound in digital input mode, press AV2 button of the
front panel to AV2 ANALOG mode. “Force analog” mode is activated by pressing the front panel AV2 button
only.
front panel to AV2 ANALOG mode. “Force analog” mode is activated by pressing the front panel AV2 button
only.
3. Turn on your TV and select the corresponding video input that you have connected to the unit.
4. Turn on your DVD player to start playing.
4. Turn on your DVD player to start playing.