Lexmark c750 Quick Reference Card
Lexmark C750
Quick Reference
Quick Reference
Loading a 500-sheet tray
Follow these instructions to load the standard tray (tray 1) and all
500-sheet trays.
500-sheet trays.
1
Remove the tray.
2
Squeeze the front guide lever and slide the guide to the front of
the tray.
the tray.
3
Squeeze the side guide lever and slide the guide to the correct
position for the size paper you are loading.
position for the size paper you are loading.
Icons along the back of the tray indicate paper sizes.
4
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges of
the stack on a level surface.
them. Do not fold or crease the paper. Straighten the edges of
the stack on a level surface.
5
Place the paper against the back left corner of the tray, print
side down. Do not bend or wrinkle the sheets.
side down. Do not bend or wrinkle the sheets.
Note:
Do not exceed the maximum stack height. Overfilling
the tray may cause a paper jam.
the tray may cause a paper jam.
6
Squeeze the front guide lever and slide the guide until it lightly
touches the stack of paper.
touches the stack of paper.
7
Reinstall the tray.
Loading a 2000-sheet tray
Follow these instructions to load a 2000-sheet tray. Do not load any
print media other than paper in the 2000-sheet tray.
print media other than paper in the 2000-sheet tray.
1
Pull open the tray.
2
Squeeze the side guide lever, lift the guide, and place it into
the appropriate slot for the size paper you are loading.
the appropriate slot for the size paper you are loading.
3
Squeeze the two front guide levers and slide them to the
correct position for the size paper you are loading.
correct position for the size paper you are loading.
4
Slide the bottom support toward the front of the tray until it
touches the front guide.
touches the front guide.
5
Flex the sheets back and forth to loosen them, and then fan
them.
them.
6
Place the paper against the back left corner of the tray, print
side down. Do not load bent or wrinkled paper.
side down. Do not load bent or wrinkled paper.
Note:
Do not exceed the maximum stack height. Overfilling
the tray may cause a paper jam.
the tray may cause a paper jam.
7
Close the tray.
Loading the multipurpose feeder
The multipurpose feeder accepts plain paper, envelopes,
transparencies, card stock, and labels.
transparencies, card stock, and labels.
1
In your word processor, spreadsheet, browser, or other
application, select File Print.
application, select File Print.
2
Click Properties (or Options, Printer, or Setup depending on the
application) to view the printer driver settings.
application) to view the printer driver settings.
3
Select MP Feeder from the Form Source list box.
4
Select your media type (envelopes, transparencies, glossy
paper) from the Media Type list box.
paper) from the Media Type list box.
5
Click OK, and then send your print job as usual.
6
Go to the printer. A display message prompts you to
Load
Manual
.
7
Open the multipurpose feeder.
8
Reach down into the feeder. Squeeze the paper guide lever
and slide the guide all the way towards the front of the printer.
and slide the guide all the way towards the front of the printer.
9
Place paper print side up, or envelopes flap side down in the
feeder. Push the media in as far as it will go without forcing it.
feeder. Push the media in as far as it will go without forcing it.
Note:
Arrange the media correctly for the size, type, and print
method you are using. Do not overfill.
method you are using. Do not overfill.
© Copyright 2001 Lexmark International, Inc. All rights reserved.
Printed in U.S.A.
This document is printed on recycled paper. 8/01
E.C. 2B0151
P/N 10B2639