GE 27907 User Guide

77

A long warbling tone 

Signals an incoming call

(with ringer on)
Three short beeps 

Page signal

(several times)
One beep every 7 seconds 

Low battery warning

No dial tone
•  Check or repeat installation steps:
  Make sure the base power cord is connected to a working 

electrical outlet.

  Make sure the telephone line cord is connected to the 

base and the wall jack.

•  Connect another phone to the same jack. If it doesn’t 

work, the problem might be your wiring or local service.

•  The handset may be out of range of the base. Move closer 

to the base.

•  Make sure the battery is properly charged (for 16 hours).
•  Make sure the battery pack (in the handset) is properly 

installed.