GE 28118fe1 User Manual

33

5.   Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is 

stored in each of the number keys. For example, to enter Bill Smith, press the  key twice 

for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter 

L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space 

between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key 

once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; 

press the 4 key twice for the letter H.
NOTE: If you make a mistake press the del/intercom/conf button to 

6.   Press the menu ok/mute  button again to save your selection. The display shows 

NUMBER.

7.   Use the touch-tone pad to enter the telephone number (up to 0 digits, including pauses), 

and press the menu ok/mute  button to confirm, The records are stored alphabetically in 

the phone book.

Press the #PAUSE/RINGER button on the handset’s touch-tone pad to insert a delay in dialing 

sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an 

outside line, or to wait for a computer access tone.) Each pause counts as one digit in the 

dialing sequence.

1.  Make sure the phone is 

OFF (not in talk mode).

.  Press the mem button to access the phone book sub-menu.
3.  Use the vol/CID ( 6 or 5)  button to scroll to 

EDIT RECORDS.

4.   Press the menu ok/mute u button to confirm, display will show the records.
5.   Use the vol/CID ( 6 or 5)  button or key in alphabet to move to desired record, press mem 

button to confirm, 

ENTER NAME shows on the display.

6.   Repeat Steps 5 through 7 in “Add Records” section.