Lexmark C710 Installation Instruction
98
Windows NT Server 4.0
5
Try printing from some other application. If the
job prints from the second application, you’ve
narrowed the problem to the first application.
Make sure you are using the current version of the
driver for the problem application.
job prints from the second application, you’ve
narrowed the problem to the first application.
Make sure you are using the current version of the
driver for the problem application.
6
Place a job in the queue using a Novell utility such
as PCONSOLE. If the job doesn’t print, contact
Lexmark for help at 1-800-LEXMARK (1-800-539-
6275) or on the World Wide Web at http://
www.lexmark.com.
as PCONSOLE. If the job doesn’t print, contact
Lexmark for help at 1-800-LEXMARK (1-800-539-
6275) or on the World Wide Web at http://
www.lexmark.com.
Windows NT
Server 4.0
1
Make sure you are using TCP/IP for
communications between the Windows server and
the MarkNet print server.
communications between the Windows server and
the MarkNet print server.
2
Make sure TCP/IP is turned on (activated) in the
print server. To find out, print a network setup
page and look in the paragraph under TCP/IP.
print server. To find out, print a network setup
page and look in the paragraph under TCP/IP.
3
Verify that TCP/IP is installed properly on the
Windows server. (Hint: Start, Settings, Control
Panel, Network, Protocols).
Windows server. (Hint: Start, Settings, Control
Panel, Network, Protocols).
4
Issue a ping command to the print server.
ping 192.168.236.24
5
Establish an FTP session with the print server.
Note:
The file you use with
FTP can be in PCL, PostScript,
PDF, HTML or any other
language the printer
understands. If the file prints,
this confirms the TCP/IP
protocol is working properly in
the MarkNet print server.
PDF, HTML or any other
language the printer
understands. If the file prints,
this confirms the TCP/IP
protocol is working properly in
the MarkNet print server.
ftp 192.168.236.24
6
Using the FTP put command, print a file.
put mytest.ps