Lexmark Z45 Installation Instruction

The following paragraph does not 
apply to any country where such 
provisions are inconsistent with local 
law: LEXMARK INTERNATIONAL, INC., 
PROVIDES THIS PUBLICATION “AS IS” 
WITHOUT WARRANTY OF ANY KIND, 
EITHER EXPRESS OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR 
A PARTICULAR PURPOSE. Some 
states do not allow disclaimer of express 
or implied warranties in certain 
transactions; therefore, this statement 
may not apply to you.

This publication could include technical 
inaccuracies or typographical errors. 
Changes are periodically made to the 
information herein; these changes will be 
incorporated in later editions. 
Improvements or changes in the 
products or the programs described may 
be made at any time.

Comments about this publication may be 
addressed to Lexmark International, 
Inc., Department F95/032-2, 740 West 
New Circle Road, Lexington, Kentucky 
40550, U.S.A. In the United Kingdom 
and Eire, send to Lexmark International 
Ltd., Marketing and Services 
Department, Westhorpe House, 
Westhorpe, Marlow Bucks SL7 3RQ. 
Lexmark may use or distribute any of the 
information you supply in any way it 
believes appropriate without incurring 
any obligation to you. You can purchase 
additional copies of publications related 
to this product by calling 1-800-553-
9727. In the United Kingdom and Eire, 
call 0628-481500. In other countries, 
contact your point of purchase.

References in this publication to 
products, programs, or services do not 
imply that the manufacturer intends to 
make these available in all countries in 
which it operates. Any reference to a 
product, program, or service is not 
intended to state or imply that only that 
product, program, or service may be 
used. Any functionally equivalent 
product, program, or service that does 
not infringe any existing intellectual 
property right may be used instead. 
Evaluation and verification of operation 
in conjunction with other products, 
programs, or services, except those 
expressly designated by the 
manufacturer, are the user’s 
responsibility.

Lexmark and Lexmark with diamond 
design are trademarks of Lexmark 
International, Inc., registered in the 
United States and/or other countries.

Color Jetprinter is a trademark of 
Lexmark International, Inc.

Other trademarks are the property of 
their respective owners.

UNITED STATES GOVERNMENT 
RESTRICTED RIGHTS
This software and documentation are 
provided with RESTRICTED RIGHTS. 
Use, duplication or disclosure by the 
Government is subject to restrictions as 
set forth in subparagraph (c)(1)(ii) of the 
Rights in Technical Data and Computer 
Software clause at DFARS 252.227-
7013 and in applicable FAR provisions: 
Lexmark International, Inc., Lexington, 
KY 40550.

The Lexmark Z45 Color Jetprinter, Type 
4111-001 has been tested and found to 
comply with the limits for a Class B 
digital device, pursuant to Part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions: (1) this device 
may not cause harmful interference, and 
(2) this device must accept any 
interference received, including 
interference that may cause undesired 
operation.

The FCC Class B limits are designed to 
provide reasonable protection against 
harmful interference in a residential 
installation. This equipment generates, 
uses and can radiate radio frequency 
energy and, if not installed and used in 
accordance with the instructions, may 
cause harmful interference to radio 
communications. However, there is no 
guarantee that interference will not occur 
in a particular installation. If this 
equipment does cause harmful 
interference to radio or television 
reception, which can be determined by 
unplugging the equipment and then 
plugging it back in, the user is 
encouraged to try to correct the 
interference by one or more of the 
following measures:

• Reorient or relocate the receiving 

antenna.

• Increase the separation between the 

equipment and receiver.

• Connect the equipment into an outlet 

on a circuit different from that to 
which the receiver is connected.

• Consult your point of purchase or 

service representative for additional 
suggestions.

The manufacturer is not responsible for 
any radio or television interference 
caused by using other than 
recommended cables or by unauthorized 
changes or modifications to this 
equipment. Unauthorized changes or 
modifications could void the user’s 
authority to operate this equipment.

Note: To assure compliance with FCC 
regulations for a Class B computing 
device, use a properly shielded and 
grounded cable such as Lexmark part 
number 12A2405 for USB attach. Use of 
a substitute cable not properly shielded 
and grounded may result in a violation of 
FCC regulations.

Any questions regarding this compliance 
information statement should be directed 
to Director of Lab Operations, Lexmark 
International, Inc., 740 New Circle Road 
NW, Lexington, KY 40550, (859) 232-
3000.

The EPA ENERGY STAR office 
equipment program is a partnership 
effort with computer manufacturers to 
promote the introduction of energy-
efficient products and to reduce air 
pollution caused by power generation.

Companies participating in this program 
introduce personal computers, printers, 
monitors, or fax machines that power 
down when they are not being used. This 
feature will cut the energy used by up to 
50 percent. Lexmark is proud to be a 
participant in this program.

As an ENERGY STAR Partner, Lexmark 
International, Inc. has determined that 
this product meets the ENERGY STAR 
guidelines for energy efficiency.

This Class B digital apparatus meets all 
requirements of the Canadian 
Interference-Causing Equipment 
Regulations.

Cet appareil numérique de la classe B 
respecte toutes les exigences du 
Règlement sur le matériel brouilleur du 
Canada.

This product is in conformity with the 
protection requirements of EC Council 
directives 89/336/EEC and 73/23/EEC 
on the approximation and harmonization 
of the laws of the Member States relating 
to electromagnetic compatibility and 
safety of electrical equipment designed 
for use within certain voltage limits. 

A declaration of conformity with the 
requirements of the Directive has been 
signed by the Director of Manufacturing 
and Technical Support, Lexmark 
International, S.A., Boigny, France. 

This product satisfies the Class B limits 
of EN 55022 and safety requirements of 
EN 60950.

This apparatus is approved under the 
approval number NS/G/1234/J/100003 
for the indirect connections to the public 
telecommunications systems in the 
United Kingdom.

• Use only the Lexmark power supply 

provided with this product or an 
authorized Lexmark replacement 
power supply.

• Connect the power cord to an 

electrical outlet that is near the 
product and easily accessible.

• Refer service or repairs, other than 

those described in the manual, to a 
professional service person.