GE jgsp28bekbb Specification Guide
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
R
Listed by
Underwriters
Laboratories
JGSP28WEK/CEK/BEK
GE
®
30" Slide-In Gas Range
Specification Revised 12/06
330228
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
If you are NOT using the
optional Filler or Backguard:
23-3/16
30
If you are using the optional
Filler or Backguard:
25
30
29-15/16" min.
30-1/16" max.
30-1/16" max.
Acceptable gas line and
electrical outlet area
35-7/8"
to 38" from
floor to
countertop
For optimum
installation
these surfaces
must be flat
and level
Follow instructions
packaged with
alternate appliance
26-5/8*
31-1/4
5-5/8"
to front
surface of
countertop
20-5/8"
door clearance from
front surface of countertop
30" min. to
unprotected
cabinet from
countertop
18" min. vertical distance
from the bottom of the
adjacent overhead cabinets
Countertop depth 25" (typical)
1-1/4" min. countertop
to top of drawer
6" min. from walls
23-3/16
24" min.
30" min.
13" max.
depth
2-1/2
25
2-1/2
7-1/2
Max. depth
of cord, plug,
recept. box &
gas hookup
4" to prevent
interference
with drawer
(excluding handle)
*Total depth from wall to
front of closed oven door
including handle is 29-5/8.
29-15/16" min.
30-1/16" max.
30-1/16" max.
Acceptable gas line and
electrical outlet area
35-7/8"
to 38" from
floor to
countertop
For optimum
installation
these surfaces
must be flat
and level
Follow instructions
packaged with
alternate appliance
26-5/8*
31-1/4
5-5/8"
to front
surface of
countertop
20-5/8"
door clearance from
front surface of countertop
30" min. to
unprotected
cabinet from
countertop
18" min. vertical distance
from the bottom of the
adjacent overhead cabinets
Countertop depth 25" (typical)
1-1/4" min. countertop
to top of drawer
6" min. from walls
23-3/16
24" min.
30" min.
13" max.
depth
2-1/2
25
2-1/2
7-1/2
Max. depth
of cord, plug,
recept. box &
gas hookup
4" to prevent
interference
with drawer
(excluding handle)
*Total depth from wall to
front of closed oven door
including handle is 29-5/8.
You must use the rear filler strip kit shipped with
the range or the optional accessory backguard
when installing these ranges
Note: Cabinets installed adjacent to slide-in
ranges must have an adhesion spec of at least
194° temperature rating.
Optional Kits for Slide-In Gas Ranges:
(Available at additional cost)
Note: Cabinets installed adjacent to slide-in
ranges must have an adhesion spec of at least
194° temperature rating.
Optional Kits for Slide-In Gas Ranges:
(Available at additional cost)
Lower/Side Trim Kits
JXS56BB - Lower Trim Kit (Black)
JXS56WW - Lower Trim Kit (White)
JXS56CC - Lower Trim Kit (Bisque)
JXS77BB - Side Trim Kit (Black)
JXS77WW - Side Trim Kit (White)
JXS77CC - Side Trim Kit (Bisque)
Accessory Backguards
JXS32BB (Black) - 4" High
JXS56BB - Lower Trim Kit (Black)
JXS56WW - Lower Trim Kit (White)
JXS56CC - Lower Trim Kit (Bisque)
JXS77BB - Side Trim Kit (Black)
JXS77WW - Side Trim Kit (White)
JXS77CC - Side Trim Kit (Bisque)
Accessory Backguards
JXS32BB (Black) - 4" High
JXS32SS (Stainless) - 4" High
JXS32CC (Bisque) - 4" High
JXS32WW (White) - 4" High
JXS37BB (Black) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37WW (White) - 5-1/4" High
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
JXS37CC (Bisque) - 5-1/4" High
JXS37WW (White) - 5-1/4" High
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Dimensions and Installation Information (in inches)
Counter Cutout Dimensions (in inches)