GE jgbs09pehww User Manual

MATERIALS YOU MAY NEED

• Gas line shut-off valve

• Pipe joint sealant or UL-approved pipe thread

tape with Teflon* that resists action of natural
and LP gases

• Flexible metal appliance connector (1/2

″ I.D.)

A 5-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing a
new range.

• Flare union adapter for connection to gas

supply line (3/4

″ or 1/2 ″ NPT x 1/2 ″ I.D.)

• Flare union adapter for connection to

pressure regulator on range (1/2

″ NPT x 1/2 ″

I.D.)

• Liquid leak detector or soapy water.

• Lag bolt or 1/2

″ O.D. sleeve anchor (for

concrete floors only).

*Teflon: Registered trademark of DuPont

FOR YOUR SAFETY

Do not store or use combustible materials,
gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.

If you smell gas:

Open windows.

Don’t touch electrical switches.

Extinguish any open flame.

Immediately call your gas supplier.

TOOLS YOU WILL NEED

Flat-blade screwdriver

Pipe wrenches (2)

(one for backup)

Phillips screwdriver

Open-end or

adjustable wrench

Pencil and ruler

Level

PART INCLUDED

Anti-tip bracket kit

Installation Instructions

Drill, awl or nail