Manualsbrain.com
  1. Manuals
  2. Brands
  3. GE
  4. J2S968
  5. Specification Guide

GE J2S968 Specification Guide

Download
Page of 2
For answers to your Monogram,
® 
GE Profile
™
 or  
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
J2S968TEK/KEK/BEK 
GE Profile
™ 
30" Slide-In Dual Fuel Range
 
Specification Created 7/05
221202
You must use the rear filler strip kit shipped with  
the range or the optional accessory backguard  
when installing these ranges
Note: Cabinets installed adjacent to slide-in  
ranges must have an adhesion spec of at least  
194° temperature rating.
Optional Kits for Slide-In Gas Ranges: 
(Available at additional cost)
 
Lower/Side Trim Kits 
JXS56BB - Lower Trim Kit (Black) 
JXS56WW - Lower Trim Kit (White) 
JXS56CC - Lower Trim Kit (Bisque) 
JXS77BB - Side Trim Kit (Black) 
JXS77WW - Side Trim Kit (White) 
JXS77CC - Side Trim Kit (Bisque)
Accessory Backguards 
JXS32BB (Black) - 4" High 
JXS32SS (Stainless) - 4" High 
JXS32CC (Bisque) - 4" High 
JXS32WW (White) - 4" High 
JXS37BB (Black) - 5-1/4" High 
JXS37CC (Bisque) - 5-1/4" High 
JXS37WW (White) - 5-1/4" High
Endcap Kit: JXS40 - Endcap kit to accommodate replace-
ment where countertop may already be notched. 
Installation Information: Before installing, consult  
installation instructions packed with product for  
current dimensional data.
All GE ranges are equipped with 
an Anti-Tip device. The installation 
of this device is an important, 
required step in the installation  
of the range.
R
Listed by 
Underwriters 
Laboratories
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30 Min.
15 Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle  
 on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30 Min.
15 Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle  
 on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
2-7/8" 
To Front  
Surface Of  
Countertop
20-5/8" 
Door Clearance
From Front  
Surface of  
Countertop
31-1/4
30
27-1/2
44-3/4
A/B*
Accessory 
Backguard
36
2" 
(Grates)
24
Acceptable  
Gas Line &  
Electrical  
Outlet Area
Max. depth of  
cord, plug,
receptacle box 
& gas hookup
3-1/2" to prevent
interference   
with drawer
30" Min.
30" Min.
Shave Raised Edge To Clear
31-1/8 Wide Control Panel
36
6" Min.
From Walls
23-3/16
18" Min.
13" Max.
3
29-15/16" Min.
30-1/16" Max.
25
9/16
7
12
15
*JXS37 is 5-1/4"  
  and JXS32 is 4"  
Dimensions and Installation Information (in inches) 
Counter Cutout Dimensions (in inches) 
Acceptable  
Gas Line &  
Electrical  
Outlet Area
Max. depth of  
cord, plug,
receptacle box 
& gas hookup
3-1/2 to prevent
interference   
with drawer
30 Min.
30 Min.
Shave Raised Edge To Clear
31-1/8 Wide Control Panel
A10208.eps
36
A/B
23-3/16
18 Min.
13 Max.
3
29-15/16 Min.
30-1/16 Max.
A is 4" min. from walls on J2S968
B is 6" min. from walls on JGS968/905
25
9/16
7
12
15