Manualsbrain.com
  1. Manuals
  2. Brands
  3. GE
  4. jd968kfcc
  5. Specification Guide

GE jd968kfcc Specification Guide

Download
Page of 2
For answers to your Monogram,
® 
GE Profile
™
 or  
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
JS968BF/KF/SF/TF 
GE Profile
™ 
30" Slide-In Electric Range
 
Specification Revised 1/08
220434
All GE ranges are equipped with 
an Anti-Tip device. The installation 
of this device is an important, 
required step in the installation  
of the range.
Listed by 
Underwriters 
Laboratories
Dimensions and Installation Information (in inches) 
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
Note: Cabinets installed adjacent to slide-in ranges must have an adhesion 
spec of at least 194° temperature rating. 
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent 
walls below countertops. To reduce possibility of scorching walls, engineering  
recommends a minimum of 1-1/2" spacing to allow for possible extended,  
high-heat, no-load heating element operation.
Receptacle Locations: For all 30" Slide-In Ranges locally approved flexible 
service cord or conduit must be used because terminals are not accessible 
after range installation. See shaded area in drawing for location of electrical 
outlet box. Recommended outlet locations allow range to be installed directly against rear wall. 
KW Rating
240V 12.4
208V 9.3
Breaker Size
240V 40 Amps
208V 40 Amps
Installation information: Before installing, consult installation instructions 
packed with product for current dimensional data. 
Acceptable
Electrical
Outlet Area
30" Min.
30" Min.
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
Excluding Models JSS28 and JSP39 
2-7/8" 
To Front 
Surface Of 
Countertop
20-5/8" Door 
Clearance
From Front 
Surface of 
Countertop
31-1/4
30
25-3/4**
Recommended
6" Min.
From Walls
23-3/16
15" Min.
A/B*
13" Max.
2-1/2
30
25
9/16
7-1/2
2-1/2
Accessory
Backguard
24
36-1/4
*JXS37 is 5-1/4" and JXS32 is 4"
 
(excluding handle)
**Total depth from wall to 
front of closed oven door 
including handle is 27-13/16.
35-7/8"–38"
from floor to
countertop
Optional Kits For Slide-In 
Electric Ranges 
(Available At Additional Cost)
Accessory Backguards 
(Attaches to the back of range 
as a backguard when unit is 
installed in 30" free-standing 
cutout) 
JXS32SS (Stainless) - 4" High 
JXS32WW (White) - 4" High 
JXS32CC (Bisque) - 4" High 
JXS32BB (Black) - 4" High 
 
JXS37WW (White) - 5-1/4" High 
JXS37CC (Bisque) - 5-1/4" High 
JXS37BB (Black) - 5-1/4" High
Body Sides 
(Slide-in ranges are sold  
without sides installed. Can 
be installed on either left 
or right when unit has one 
exposed side [no cabinet 
adjacent]. Kit contains  
1 body side) 
JXS77WW (White) 
JXS77CC (Bisque) 
JXS77BB (Black) 
Vertical Side Trim Kits 
(If cabinet cutout width is 
more than 30", a vertical  
side trim kit may be used to 
close the gap between the 
range and cabinet)  
JXS86WW (White) 
JXS86CC (Bisque) 
JXS86BB (Black) 
Optional Lower Trim Kits 
(If counter height is greater 
than 36.5", a lower trim kit 
is recommended to extend 
the useful height to 38" 
maximum)
 
JXS56WW – White 
JXS56CC – Bisque 
JXS56BB – Black
Optional Top Filler Kits 
JXS66WW – White 
JXS66CC – Bisque 
JXS66BB – Black
Acceptable
Electrical
Outlet Area
30" Min.
30" Min.
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
Excluding Models JSS28 and JSP39 
2-7/8" 
To Front 
Surface Of 
Countertop
20-5/8" Door 
Clearance
From Front 
Surface of 
Countertop
31-1/4
30
25-3/4**
Recommended
6" Min.
From Walls
23-3/16
15" Min.
A/B*
13" Max.
2-1/2
30
25
9/16
7-1/2
2-1/2
Accessory
Backguard
24
36-1/4
*JXS37 is 5-1/4" and JXS32 is 4"
 
(excluding handle)
**Total depth from wall to 
front of closed oven door 
including handle is 27-13/16.
35-7/8"–38"
from floor to
countertop