Sonin dt110 Reference Guide
- 6 -
KEY PAD INFORMATION
1
2
3
4
Performs arithmetic operation the
display "blinks" to confirm the key
press.
5
Completes all previously entered
arithmetic operations and displays
the result. See page 21 for the use
of this key with constants.
·
Enters a decimal point when in the
df, m or number mode.
2nd
FN
Activates the "2nd function" of
designated keys. Display blinks after
press until a "2nd function" key is
pressed. Press again to stop blinking.
5
X
2
2nd
FN
Calculates the square of the value
displayed. A fif or if display will
automatically change to df when
squared.
2nd
FN
C
X
%&
Calculates the square root of the value
displayed. A fif or if display will
automatically change to df when the
square root is taken.
- 7 -
KEY PAD INFORMATION
DIMENSION KEYS
fifdfm
modes
Converts between Foot-Inch-
Fraction (fif), Decimal Feet (df) and
Meters (m). The small labels at the
top of the display indicate which mode
you're in. Switching modes works in
both directions.
ENTER
When in fif mode, this key ends a
FEET or INCH entry and advances
to the next input position.
/ 2
/ 4
/ 8 / 16
When in fif mode, these denominator
keys will complete your FRACTION
entries.
2nd
FN
A
fif if
Changes display format between
Foot-Inch-Fraction (fif) and Inch-
Fraction (if). Functional only when
starting in the fif or if modes.
Puts calculator into the number
modes where it works as a normal
calculator (no dimensions) Return to
the fif mode anytime by pressing
fifdfm
modes
again.
2nd
FN
fifdfm
modes
number mode
- 8 -
KEY PAD INFORMATION
TRIANGLE KEYS
Enter any 2: A, B, C, or S and automatically solve
for the other 2.
C
diagonal
run
A
rise B
12"
S
S = slope in inches
If any 2 of the above values are entered pressing
A, B, C, or S will display the calculated or stored
value of the key.
The triangle key values are retained in memory
even after INCHMATE+ is turned off.
A
"run" Press keys after an entry or
a calculated result is displayed to
enter that value into "run" memory
or to recall.
B
"rise" Press keys after an entry or
a calculated result is displayed to
enter that value into "rise" memory
or to recall.