Fujitsu fi-6670 User Guide

Chapter 9 Operational Settings

166

■Resetting the counters

Reset the consumables counter(s) every time you replace the 
consumable(s). Follow the procedure below.

Click the [Clear] button beside the replaced consumable.

Click the [OK] button on the confirmation message 
displayed.

⇒

The counter is reset to 0.
The remaining ink indication (percentage) is reset to 100.

In the Software Operation Panel, click the [OK] button.

■Replacing and Cleaning Instructions

The following may sometimes appear while using the scanner:
Replacing instruction:

Cleaning instruction:

According to the instruction displayed, clean the scanner or 
replace the consumables.

When you click the [Ignore] button, the cleaning instruction 
disappears and the scanning continues. You may be able to 
continue the scanning for a while, however, it is recommended 
that you replace the consumable(s) as soon as possible.
To stop the scanning and replace the consumable(s) right 
away, click the [Cancel] button.

For how to replace the consumables, refer to the following 
sections:

Pick Roller; see 

"7.2 Replacing the Pick Rollers" (on page 125).

Brake Roller; see 

For how to clean the scanner, refer to 

.