Cma eva-ah-t Quick Setup Guide
Connect hard wire power supply from
dishmachine to power box.
MODEL EVA REAR VIEW
DRAIN HOSE
HARD WIRE
FOUR WIRE
POWER SUPPLY
1
2
3
4
Connect dishmachine to hot water source
recommended 140
° temperature (120°
minimum temperature required).
Insert tube stiffener with chemical tubing
into each corresponding chemical
dispensers.
BLUE
RED
WHITE
4
STEP
TUBE
STIFFENER
TUBE
STIFFENER
AUTO START
SWITCH
2" DRAIN
OUTLET
POWER SWITCH
CHEMICAL
TUBING
CHEMICAL
TUBING
3/4" WATER
INLET
3
HARD WIRE
POWER SUPPLY
2
HARD WIRE
POWER SUPPLY
NORMAL-OFF DELIMER
SWITCH
DRAIN/RINSE
SWITCH
SANI/DETERGENT
SWITCH
4
4
4
1/2" WATER
INLET
1
2
3
4
Models EVA
EVA-C, EVA-T
& EVA-C-T
Quick Setup
Instructions
800-854-6417
WARNING
: Electrical and plumbing connections
need to be made by a licensed service person
and comply with all Federal, State and Local
Health, Electrical, Plumbing and Safety codes.
and comply with all Federal, State and Local
Health, Electrical, Plumbing and Safety codes.
WARNING
: Electrical and
plumbing connections
need to be made by a
licensed service person
and comply with all
Federal, State and Local
Health, Electrical,
Plumbing and Safety
codes.
need to be made by a
licensed service person
and comply with all
Federal, State and Local
Health, Electrical,
Plumbing and Safety
codes.
5-2007
3
STEP
WALL
DRAIN
8"
FLOOR DRAIN
Connect a 2" drain pipe (not
supplied) from scrap accumulator
to floor or wall drain.
2
STEP
1
STEP
1
STEP
ON/OFF
POWER SWITCH