LG bd645 User Guide

20

C

onnecting

 

y When plugging or unplugging the LAN 

cable, hold the plug portion of the cable. 
When unplugging, do not pull on the LAN 
cable but unplug while pressing down on 
the lock.

 

y Do not connect a modular phone cable to 

the LAN port.

 

y Since there are various connection 

configurations, please follow the 
specifications of your telecommunication 
carrier or internet service provider.

 

y If you want to access content from DLNA 

servers, this player must be connected to 
the same local area network with them via a 
router.

 

,

Note

Rear of the unit

Router

Broadband  
service

DLNA certified 

server

If there is a DHCP server on the local area network 
(LAN) via wired connection, this player will 
automatically be allocated an IP address. After 
making the physical connection, a small number of 
home networks may require the player’s network 
setting to be adjusted. Adjust the [NETWORK] 
setting as follows.

Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
1.  Select [Connection Setting] option in the 

[Setup] menu then press ENTER (b). 

2.  Select [Yes] and press ENTER (b) to continue. 

The new connection settings reset the current 
network settings.

3.  Use W/S/A/D to select the IP mode 

between [Dynamic] and [Static].

 

Normally, select [Dynamic] to allocate an IP 
address automatically.

If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using  
W/S/A/D and numerical buttons. If you 

make a mistake while entering a number, press 
CLEAR to clear the highlighted part.

 

,

Note

4.  Select [OK] and press ENTER (b) to apply 

network settings.

5.  The player will ask you to test the network