Fantom Drives mgd-16fc16a Reference Guide
Array Maintenance
4-12
Screw
Screw
4.3.3 Replacing a Fan
1.
Unscrew the fan holder.
2.
Disconnect the fan cable connects between the backplane and the fan.
3.
The fans are attached to the fan holder. Remove the screws on the cor-
ners of the defective fan. Place the screws on a safe place as you will
need them later when you install a new fan.
ners of the defective fan. Place the screws on a safe place as you will
need them later when you install a new fan.
Note:
We recommend that you remove the fan holder from the subsystem.
This allows easy installation and unlimited workspace when replac-
ing the fan.
We recommend that you remove the fan holder from the subsystem.
This allows easy installation and unlimited workspace when replac-
ing the fan.
4.
Install a new fan using the screws you removed in step 3.
5.
Replace the fan holder.
6.
Reconnect the fan cable connects.