BTC dsc 3320z User Guide
Taking Pictures
– 16 –
Using the Flash
Pressing the flash button cycles your camera
through the various flash modes.
A symbol appears on the LCD screen to indicate
the flash mode. The flash cannot be used in Video
mode.
through the various flash modes.
A symbol appears on the LCD screen to indicate
the flash mode. The flash cannot be used in Video
mode.
The following list describes each flash mode.
Automatic – Flash fires when conditions require extra lighting.
Always on – Flash fires every time you take a photo, regardless of lighting conditions.
RedEye – Flash strobes to let the subject’s eyes adjust to the flash, then fires again
when the photo is taken.
Always off – The flash never fires.
Adjusting the Exposure
Set the exposure value (EV value)
manually to
compensate for unusual lighting conditions such as indirect
indoor lighting, dark backgrounds, and strong backlighting.
indoor lighting, dark backgrounds, and strong backlighting.
1. Turn on the camera and press the MENU button.
2. Use the UP or DOWN buttons to select the
2. Use the UP or DOWN buttons to select the
Exposure option.
3. Press the RIGHT button to enter the Exposure
submenu.
4. Use the LEFT and RIGHT buttons to set the desired
exposure compensation value.
5. Press the SET button to save your selection or
MENU button to cancel.
The flash mode and exposure value are displayed in the
OSD screen.
OSD screen.
Flash
Button
Button
Flash mode
Exposure
value