LG lrg30355 Installation Instruction

GAS RANGE

INSTALLATION INSTRUCTIONS

Please read this guide thoroughly 

before installation.

To contact LG Electronics, 24 hours a day, 
7 days a week:

Or visit us on the Web at: 

P/No. MFL33949301

Installation of this range must conform with local
codes, or in the absence of local codes, with
the National Fuel Gas Code, ANSI
Z223.1/NFPA.54, latest edition. In Canada,
installation must conform with the current
Natural Gas Installation Code, CAN/CGA-
B149.1 or the current Propane Installation Code,
CAN/CGA-B149.2, and with local codes where
applicable. This range has been design-certified
by CSA International according to ANSI Z21.1,
latest edition and Canadian Gas Association
according to CAN/CGA-1.1 latest edition.

As with any appliance using gas and generating
heat, there are certain safety precautions you
should follow. You will find these precautions in
the Important Safety Information section in your
User’s Guide. Read them carefully.

•

– Save these instructions for

local electrical inspector’s use.

•

– Observe all governing

codes and ordinances.

Note to Installer: Leave these instructions with
the appliance after installation is completed.
Note to Consumer: Keep the User’s Guide and
Installation Instructions for future reference.
NOTE: This appliance must be properly

grounded. 
• The electrical diagram is in an envelope

attached to the back of the range.

• Skill level – Installation of this appliance

requires basic mechanical skills.

• Proper installation is the responsibility 

of the installer.

• Product failure due to improper installation 

is not covered under the Warranty.

• Remove all tape and packaging.

• Make sure the burners are properly seated 

and level.

• Take the accessory pack out of the oven 

and/or drawer.

• Check to be sure that no range parts have

come loose during shipping.