Toshiba M50 User Guide

Page of 271
67
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
Closing the display panel
When you are finished, shut the computer down and close the 
display panel to keep dust and dirt out of the computer. 
If you close the computer while it is still on, these actions will 
occur: 
If you have the LCD power-saver feature set, the LCD 
panel will automatically turn off until you open it again.
If you have the audible warning set, the computer will 
beep to notify you that it is still on. 
If you have an action feature set, the computer will 
perform either: Nothing, Standby, Hibernate, or Turn Off 
(see 
Using external display devices
Your computer comes with a built-in LCD display, but you 
can also connect an external display device to the available 
video port:
An external monitor or projector via the RGB (monitor) 
port.
Before connecting an external monitor or video projector, 
configure your computer for the type of device you are 
connecting. To do this, refer to the documentation for your 
operating system and devices.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your 
computer if you need a larger screen. To do this:
1
Connect the monitor’s video cable to the RGB (monitor) port 
on the left side of the computer.
2
Connect the device’s power cable to a live electrical 
outlet.