HannsG hw222 User Manual

User’s Manual 
 

14 

 

 

Power Button: 
Press this button to switch ON/OFF of monitor’s power.   

 

 

Power Indicator: 
Green 

—  Power On mode. 

Orange  —  Power Saving mode. 

 

 

MENU / ENTER:   
1.  Activates the OSD menu or confirms adjustments to settings. 
2.  Exit OSD volume display when in volume OSD status. 

 

 

Volume ◄/►:  
1.  Activate the volume control when the OSD is OFF. 
2.  Navigate through adjustment icons when OSD is ON or adjust a function when 

function is activated. 

 

 

i Button: 
1.  Press this button for less than 1.5 sec. to activate the Auto Adjustment function in 

Analog mode. (The Auto Adjustment function is used to optimized the H-Position, 
V-Position, Clock and Phase.) 

2.  Press this button for more than 1.5 sec. to change input source. 

(Analog->Digital->YPbPr source) 

 

 

Do not install the monitor in a location near heat sources such as radiators or air dusts, 
or in a place subject to direct sunlight, or excessive dust or mechanical vibration or 
shock. 

 

Save the original shipping box and packing materials, as they will come in handy if you 
ever have to ship your monitor. 

 

For maximum protection, repackage your monitor as it was originally packed at the 
factory. 

 

To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains 
may be removed with a cloth lightly dampened with a mild detergent solution. Never use 
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage 
the cabinet. As a safety precaution, always unplug the monitor before cleaning it. 

 

Function Key Lock:   
Press the <「Volume -」, >「Volume +」  and the  「Menu」  buttons simultaneously to 
enable the Function Key Lock. When the Function Key Lock is enabled, only the Power 
button is active. Press the <「Volume -」, >「Volume +」  and the  「Menu」buttons 
simultaneously again to unlock the function keys.