Netopia 430 s Reference Guide

■

10.0.0.5 to a Windows 95 PC

3.

Create a connection profile for your ISP or other remote net-
work. See 

. In the IP 

Profile Parameters screen, toggle Address Translation Enabled 
to Yes, to turn on NAT for this profile.

4.

When your Netopia ISDN Router calls the ISP, the remote router 
that answers the call assigns your Netopia ISDN Router an IP 
address that external users use to communicate with your net-
work. To view this address, go to the QuickView menu and 
check More Info in the Current ISDN Connection Status section 
of the profile. 

In the following example screen, 192.163.100.6 is assigned to 
the calling Netopia ISDN Router.

Quick View

Ethernet Address --  00-00-c5-60-04-6b Current Date -- 11/20/96 09:56:49 AM

Firmware Version --  2.0 

 Last Cfg Access --

IP Address -- 10.0.0.1 

AppleTalk EN Address -- 32983:150

IPX Network Address -- 00000000 

AppleTalk EN Address -- 32982:149

                        Current ISDN Connection Status

Profile Name-------State-%Use-Remote Address-----Est.-More Info-----

ISP 

B1

10 

IP 192.163.4.1 

Lcl  NAT 192.163.100.6

                                 LED Status

-----ETHERNET----+---B1---SWITCH----B2-+-CARD-+-PWR +-----LEDS-------

LNK LNK TX COL AUI RX CON  SYNC TX  RX CON             |'-'= Off 'E'= Error

  O   -   -  -   - - O     O   -   -  -      -     O  |'O' = On '*'= Blink

Internal users can access the Internet as they always do; the 
external Internet, however, views all traffic that the computers 
generate on the internal network as originating from 
192.163.100.6. Similarly, all traffic your network receives is 
addressed to 192.163.100.6.