Mitsubishi hs-hd1100u User Manual
48
Auto power save (auto-off)
When the Auto Power Save feature is turned on, the VCR will automatically turn off
after remaining idle for 30 minutes. If a control, such as a menu function or
channel selection is used or if there is a tape playing or being recorded, the VCR
will remain on.
after remaining idle for 30 minutes. If a control, such as a menu function or
channel selection is used or if there is a tape playing or being recorded, the VCR
will remain on.
3
Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST buttons to select Auto power save. Press ENTER
to set to ON.
appears. Use the ADJUST buttons to select Auto power save. Press ENTER
to set to ON.
4
Press MENU twice to exit the menus.
IMPORTANT
When viewing analog broadcast stations through the VCR, 3minutes
>Power
off will appear on the TV screen three minutes before the VCR power turns
off. The display will count down the number of minutes until the VCR turns
off. If you want to continue using the VCR, press any of the buttons.
off. The display will count down the number of minutes until the VCR turns
off. If you want to continue using the VCR, press any of the buttons.
RF converter
If your TV has audio and video inputs, turn the RF converter OFF. If your TV does
not have audio and video inputs, keep the RF converter set to ON. It is preset by
the factory to ON.
not have audio and video inputs, keep the RF converter set to ON. It is preset by
the factory to ON.
3
Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST buttons to select RF converter. Press ENTER to
select ON or OFF.
appears. Use the ADJUST buttons to select RF converter. Press ENTER to
select ON or OFF.
4
Press MENU twice to exit the menus.
IMPORTANT
If the RF converter is set to ON, you aren’t required to press VCR/TV to play
a tape or to use VCR menus. The VCR light will automatically light up when
you press PLAY or MENU. Be sure to set the TV to the video channel (see
page 12).
a tape or to use VCR menus. The VCR light will automatically light up when
you press PLAY or MENU. Be sure to set the TV to the video channel (see
page 12).
PerfecTape
®
PerfecTape
®
is an exclusive Mitsubishi feature that tests the quality of video tapes
you will record on. After each test, the VCR will adjust its internal circuitry in order
to make the best possible recording on your tape.
to make the best possible recording on your tape.
setting up PerfecTape
®
You can set up PerfecTape
®
to function two ways.
If you want the VCR to automatically test any non-recorded tapes when the tape is
loaded, set Auto PerfecTape to ON.
loaded, set Auto PerfecTape to ON.
If you do not want the VCR to automatically test tapes, select OFF. PerfecTape
®
will now function only when you start a test. Any tape with the erasure prevention
tab intact can be manually tested.
tab intact can be manually tested.
It will not automatically test recorded tapes – you must choose to test those
yourself.
yourself.
3
Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST buttons to select Auto PerfecTape.
appears. Use the ADJUST buttons to select Auto PerfecTape.
4
Press ENTER to set Auto PerfecTape to ON or OFF.
5
Press MENU twice to exit the menus.
using PerfecTape
®
automatically
1
Load a blank tape into the VCR.
√Customize choices
ƒVideo mute
ON
OFF
ƒAuto power save ON
OFF
ƒRF converter ON
OFF
ƒAuto PerfecTape
ON
OFF
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select
√Customize choices
ƒVideo mute
ON
OFF
ƒAuto power save ON
OFF
ƒRF converter
ON
OFF
ƒAuto PerfecTape ON
OFF
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select
√Customize choices
ƒVideo mute
ON
OFF
ƒAuto power save
ON
OFF
ƒRF converter ON
OFF
ƒAuto PerfecTape ON
OFF
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select
Advanced Features