Mitsubishi lt-3280 Owner's Manual

4BGFUZ5BC

4UBOE

4UBOE4DSFXT

%JTQMBZ

1.  Before performing work, make sure to 

disconnect the AC power cord from the display.

2.  Before performing work, spread the protective 

sheet that was wrapped around the display 
on a flat, even surface (such as a table). The 
protective sheet will prevent the display from 
being damaged.

3.  Gently place the display face down on the 

protective sheet with the display stand hanging 
over the edge of the table.  See the illustration 
to the right.

4.  Remove the small cover on the back of the 

display.  See the illustration to the right.  Press 
on the small tab to release the cover.  Keep 
the cover and reinstall it after connecting the 
display to the media center.

5.  With the stand hanging over the edge of the 

table, have one person hold the stand firmly 
with both hands while the other person uses a 
screwdriver to remove the six (6) stand screws. 
See the illustration to the right.

6.  While the first person continues to hold the 

stand firmly, have the other person unscrew 
the Safety Tab screw. See the illustration to the 
right.

7.  The person holding the stand can now put the 

stand carefully in a safe place for future use. 

8.  The display is now ready for mounting.  Refer to 

the instructions provided with the Wall Mount 
Kit (purchased separately). 

5BCMF

1SPUFDUJWF
TIFFU

%JTQMBZ

4UBOE

 

•  A minimum of TWO PEOPLE are needed to safely remove the stand.

 

•  One person needs to hold the stand while the other person removes the stand screws. 

 

    This is necessary to prevent the stand from falling to the floor.

 

•  Failure to follow these recommendations may result in personal injury as well as damage to the

 

    product.

PSM-2048)

Please call the Mitsubishi Parts Department at: (800) 553-7278

or call Chief Manufacuring, Inc. at: (800) 582-6480.