Mitsubishi lt-3280 Owner's Manual

To change the color temperture of the display, do the 

following: 

1.  If the TV is on, power it off by pressing Power on the 

remote control.  Then disconnect the display and the 
media center power cords from the AC wall outlets. 
Both power cords must be disconnected. 

2.  Disconnect the MontiorLink™ RS-232 Control 

cable from the media center. It is not necessary to 
disconnect the MonitorLink™ cable from the display.

3.  Set the remote control to TV (see illustration to the 

right). Re-connect the display power cord to the AC 

wall outlet, then power On the display by pressing 
Power on the remote control. 

4.  Press MENU on the remote control, then select Color 

Temperature from the on-screen menu. Select the 

color temperature setting you prefer (low, medium, 
or high). See the Color Temperature Options table to 
the right.

5.  Power Off the display and disconnect the display 

power cord from the AC wall outlet. Then set the 
remote control back to CABLE/DBS/DTV (see 
illustration to the right). 

6.  Connect the MonitorLink™ RS-232 Control cable to 

the media center.

7.  Connect the display and the media center power 

cords to the AC wall outlets. Then, to power On both 
the display and the media center, press Power on the 

remote control. 

 

The color temerature you selected will remain for all 

images shown on the display until you re-set it by 
following the above procedure.

NOTE: The default color temperature setting for the 
LT-3280 and LT-3780 displays is “high.” 

Whites  appear 
warm, more red 

Whites are more neutral

Whites appear 
cool, more blue

Best for a 
room with low 
incandescent 
lighting

Best for a room with 
moderately bright 
incandescent lighting    
       

Best for a room 
with bright  
incandescent or 
florescent lighting

TV setting

CABLE/DBS/DTV setting