Mitsubishi lt-3280 Owner's Manual

1.  Remove the remote control’s rear cover by gently 

pressing the ribbed tab in the direction of the arrow 
and sliding off the cover.

1.  Press SLEEP on the remote control.

2.  Each press of SLEEP increases the time displayed by 

30 minutes, until the maximum value of 120 minutes 
is reached.

3.  After 5 seconds of inactivity, the message will   

 

disappear.

4.  Press SLEEP to view the remaining time before the   

 timer turns the TV off. 

1.  Press SLEEP to display the on-screen message.

2.  Press SLEEP repeatedly until OFF is displayed.

Note:  After 5 seconds of inactivity, the message box

           disappears.

2. Load the batteries, making sure the (-) and (+) 

polarities are correct.  For best results, insert the 
negative (-) side first.

  • Be within 20 feet of the equipment.

  • Do not press two or more buttons at the same 

     time unless instructed.

  • Do not allow unit to get wet or become heated.

  • Avoid dropping on hard surfaces.

  • Do not use harsh chemicals to clean.  Use only

     a soft cloth, lightly moistened with water. 

  • Do not mix new and old batteries.

  • Do not heat, take apart or throw batteries into fire.

  • Use only AA alkaline batteries.

Hint:  If the remote is in the Cable/DBS/DTV layer 
and will not operate the media center, press and hold 
POWER and enter 1, 9, 7 to reset the remote control.

1"(&

"" BMLBMJOF
CBUUFSJFT