Mitsubishi lt-3280 Owner's Manual

To record a current program, press REC (record) when 
your program choice is highlighted on the program list 
in ChannelView.  A red “R” will be added after the input 
name.  The media center will immediately switch to the 
selected channel and start recording.

To record a future program, press ADJUST  

 or 

 

to select the channel you want to record from.  For 
detailed program information, press ADJUST  .  Press 
REC (record) when your choice is highlighted.  A red “R” 
will be added after the input name.  The message, The 
recording has been added to the Record List will display.  
To view, change or cancel a recording, use the Record 
List (page 59 ).  If a program title was not sent by the 
broadcaster, you will be unable to set up a recording and 
a message will display.  

For NetCommand compatible satellite receivers and 
some cable boxes, GUIDE will display the on-screen 
programming guide for the receiver or cable box. Press 
ADJUST     

 

 or 

 and ENTER to navigate the 

displayed Guide.  For NetCommand compatible satellite 
receivers, you may also be able to use the number or 
other additional buttons. 

 

 

 

For NetCommand compatible DVD players, GUIDE will 
display the DVD disc “top” menu (not the setup menu). 
For A/V Discs, pressing GUIDE will display the Track List 
screen. For IEEE 1394 devices with digital connections, 
press GUIDE twice to display the device’s Guide.  

For compatible traditional  VCRs, pressing GUIDE when 
the VCR is highlighted on the Device Selection menu will 
change the VCR’s input.

When the A/V Receiver icon is highlighted in the Audio 
Section, pressing GUIDE switches the A/V Receiver from 
analog audio to digital audio and vice versa.

When in the Record To menu, pressing GUIDE will display 
the current list of programmed recordings.  Please see 
Record List, page 59 for more infomation.

Press GUIDE while viewing Ant-1 or Ant-2 to display a list 
of available memorized digital channels (D) and analog 
(A) channel information (if available from the broadcaster).  
This list is called ChannelView™.  

ChannelView for digital channels will show the major and 
sub-channels (or bitstreams).  Analog channel information 
will display as sent.  Press ADJUST 

 or 

 to scan 

through the all the channels in memory one by one.  To 
cycle through the choices quickly, press CH  

 or 

.

For detailed program information, press ADJUST   . To 
return to basic information press ADJUST   .  This 
information is sent by the broadcaster.  If limited data 
is shown or no program data appears, it is because the 
broadcaster is not sending the information.  This is not a 
defect of your media center.