Mitsubishi lt-3280 Owner's Manual

Select to reset the Color Balance settings.  Each active 
input can be individually reset, if Auto is not checked.

For some TV formats sidebars are visible (see TV Display 
Formats,  G).  You can choose to display these sidebars 
in gray or black.  When used with the LCD display, black 
is recommended. 

For some service related issues, it may be necessary 
to know which software version is in your media center.  
This information is displayed on the Setup menu screen.   

Display the on-screen menus in either English or Spanish 
(Español).  The first time you powered On your media 
center, you were requested to select an on-screen menu 
language.  If you choose to change the selection, all 
menu text will immediately switch to the language of your 
choice.  

Program titles and other information sent by a  
broadcaster will be shown in the original language.

Your media center uses six colors (Magenta, Red, Yellow, 
Green, Cyan and Blue) to create color balance.  You 
may adjust the intensity of the colors automatically or 
manually (PerfectColor™) or reset them to the default 
settings.  Each input or device has a memory for 
PerfectColor.

If the Auto box is checked, your media center will 
optimize color automatically and continuously.  Both 
PerfectColor and Reset options for Color Balance are 
grayed out and unavailable.

The PerfectColor (manual) option is only available when 
Auto (Color Balance) is not checked.  Select PerfectColor 
and press ENTER to display the menu.  Individual sliders 
for Magenta, Red, Yellow, Green, Cyan and Blue will be 
displayed.  The sliders have a numeric value, where 63 
is the maximum. The default setting for each color is 31 
(center).  Highlighted text will show which slider you are 
adjusting.   Each active input can be individually adjusted.
Press ADJUST  

 or 

 to navigate between colors and 

ADJUST   or    to change the color slider settings.