Mitsubishi lt-3280 Owner's Manual

The Antenna Menu options are available for use with analog 

and digital channels on Antenna-1 and Antenna-2.  You 
can memorize channels, add or delete channels, name 
channels and add channels to an SQV (Super Quick 

View™) bank.

Select either Air (when used with an indoor/outdoor 
antenna) or Cable (when used with direct cable) 
then press ENTER  to start the automatic channel 

memorization process.  If a CableCARD™ is being used, 
memorized channels are provided by your cable provider 
through the CableCARD.  

To stop the automatic channel memorization process, 

press CANCEL.  Channels memorized before you 
pressed CANCEL are retained in memory.  

After memorizing   channels, the  channels in the memory 

can be accessed in ascending or descending order by 
pressing CH 

 or 

.

The memorization will occur twice, as the media center 

memorizes analog and digital channels separately.

When a memorized channel is available as both analog 
and digital, a check mark in the Prefer Digital box will 
allow digital channels to display and analog channels to 

be hidden (when using CH).  Removing the checkmark 
will show both analog and digital choices.  This function 
is unavailable (grayed out) when TV Guide On Screen® 
has been set up

Channels can be changed in 3 ways:

1.  By pressing ADJUST 

 or 

 to select the channel. 

2. By pressing CH 

 or 

 for channels already in 

memory. 

3.  Directly entering the number.  With so many current 

and potential channels, the number range is greatly 
expanded.  Channels can be one part, analog or 
digital (up to the number 16383) or two part, for digital 
channels (these use a separator).  For a two part 
digital channel, you may press SUB/CANCEL on the 
remote to enter a separator after the first, second or 
third number, depending on the broadcaster’s channel 
information.  

 

For digital channels, when the broadcaster has sent a 
virtual channel number, the virtual channel number is 

shown in the text box and as a reference,  the original 
digital channel is shown below the text box.

After the available channels have been memorized with 

Memorize, weaker channels can be added.  Unwanted 
channels can also be deleted.  Press CH 

 or 

 on the 

remote control to see the channels in memory.  Press 

ADJUST 

 or 

 to select Added or Deleted for the 

channel shown in the Channel number box.

Analog channels shown on Antenna-1 or Antenna-2 can 

be named (up to four characters).  After you enter a 
name, it will appear on the TV screen, next to the channel 
number.

1.   Press ADJUST  

 or  

 to select each letter.  

2.  Press ENTER  to set the letter and move to the  

 

next letter position.  

3.  Press CANCEL to move back one position. 

Digital channels are automatically named if the 
broadcaster sends the information.