Mitsubishi lt-3280 Owner's Manual

1.  Press the SQV button.

2.  To change memory banks, press a number button 

within 5 seconds of pressing the SQV button.

3.  Press the SQV button repeatedly to cycle through the 

channels available in that bank.

1. Press CH  , 

 or number buttons to select the 

channel you want to add to the current SQV memory 
bank.

2.  Press and hold the SQV button for about 2 seconds.  

When “SQV” and the memory bank number 
appear under the channel number, the channel has 
successfully been added.

1.  Press the SQV button and then the memory bank 

number.

2.  Press the SQV button repeatedly until you see the 

desired channel.

3. While the channel number and SQV indicator (with 

correct bank number) are still displayed on the screen, 
press the CANCEL button.  If the CANCEL button 
is not pressed before the SQV indicator disappears 
automatically, the channel will not be removed.

4.  When the SQV indicator disappears, the channel 

has successfully been removed only from that bank.  

“Other” banks remain unchanged.

SQV (SuperQuickView™) allows you to put together 
banks of your favorite channels from Antenna 1 and 

Antenna 2. You can store channels in any of the 9 

different SQV memory banks.  You can also store the 
same channel in multiple memory banks.  Once you 

have added a channel to an SQV memory,  “SQV” and 
the memory bank number will appear under the tuned 

channel number on the display screen.

1.  Select the channel using the “Channel” option box or 

press CH 

 or 

.

2.  Highlight the bank (SQV1-SQV9).

3.  Press ENTER  to check mark the selected SQV 

memory bank.

4.  Repeat for additional channels or banks.

1.  Highlight the box for the SQV bank number.

2.  Press ENTER  to remove the check mark.