Mitsubishi lt-3280 Owner's Manual

       Provides a slider to adjust the white-to-black level.  

Low contrast shows a variety of shades in darker 
images, while high contrast shows darker images 
more uniformly black and makes colors appear 
more vibrant.  In most home lighting situations, a 
medium contrast looks best.  High contrast is good 
for brightly lit environments.

◊ Brightness 

Provides a slider to adjust the overall brightness of 

the picture

.

◊  Sharpness 

Provides a slider to adjust the detail and clarity.

◊  Color 

Provides a slider to adjust the color intensity.

◊  Tint 

Provides a slider to adjust the proportion of red to 

green.

◊  Video Noise 

Use to reduce minor noise (graininess) in the 

broadcast received on Ant-1 and Ant-2, Inputs 1 
and 2, and Component 1 and 2.  Use standard with 
good quality signals.

 

On is the automatic setting and will automatically 

detect and apply film decoding correction for 
signals that originated on 24 frames per second film 
cameras and then were converted for broadcast to 
30 frames per second video. 

 

When the original signals originated on 30 frames 

per second video cameras, the On setting will 
automatically apply video decoding, the same as 
used with the Off setting.  Try the Off setting when 
the TV seems to have difficulties and adds too many 
jagged edges to the images.

 

Film Mode is not effective for progressive scan 
(480p) devices, and high definition signals.

◊  Backlight

 

Use to manually adjust the contrast of the PC screen 

image. 

NOTE:  A slider will display on-screen for most settings.  

When the slider is displayed it has a numeric value, 
where 63 is the maximum, 31 is the mid-point and 0 is 
the minimum. 

To adjust individual Video settings directly with the 

remote control:

1.  Press VIDEO to cycle through the available settings.

2. Press ADJUST   or   to adjust the setting.  After 5 

seconds of inactivity, the setting display will disappear.