Mitsubishi ew270u User Guide
EN-29
ENGLISH
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help
you achieve better time management when giving presentations. Follow these
steps to utilize this function:
1.
Press TIMER SET UP on the remote control or go to the SYSTEM
SETUP: Basic > Presentation Timer menu and press MODE/ENTER to
display the Presentation Timer page.
SETUP: Basic > Presentation Timer menu and press MODE/ENTER to
display the Presentation Timer page.
2.
Press
to highlight Timer period and decide the timer period by
pressing
/
. The length of time can be set from 1 to 5 minutes in 1-
minute increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer period is reset.
3.
Press
to highlight Timer display and choose if you want the timer to show up on the screen by pressing
/
.
4.
Press
to highlight Timer position and set the timer position by pressing
/
.
5.
Press
to highlight Timer counting direction and select your desired
counting direction by pressing
/
.
6.
Press to highlight Sound reminder and decide if you want to activate sound reminder by pressing
/ . If
you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep
sound will be produced when the timer is up.
sound will be produced when the timer is up.
7.
To activate the presentation timer, press
and press
/
to select On and press MODE/ENTER.
8.
A confirmation message is displayed. Highlight Yes and press MODE/ENTER to confirm. You will see the
message “Timer is On” appearing on the screen. The timer starts counting once the timer is turned on.
message “Timer is On” appearing on the screen. The timer starts counting once the timer is turned on.
If you switch input signal or press AUTO when the timer is on, the timer will be stopped.
To cancel the timer, perform the following steps.
1.
Go back to the Presentation Timer page.
2.
Press and press
/ to highlight Off and press MODE/ENTER. A confirmation message is displayed.
3.
Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is Off” appearing on the
screen.
screen.
How to use the TIMER On key?
TIMER ON is a multi-functional key.
•
If the presentation timer is off, pressing this key displays a confirmation
message. You can decide whether to activate the timer or not by following
the on-screen instruction.
message. You can decide whether to activate the timer or not by following
the on-screen instruction.
•
If the timer is already on, pressing this key displays a confirmation
message. You can decide whether to restart, continue or turn off the timer
by following the on-screen instruction.
message. You can decide whether to restart, continue or turn off the timer
by following the on-screen instruction.
Selection
Description
Always
Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min
Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decrease from the preset time to 0.
5 min
5 min
5 min
5 min